Manual

Index
IX–2 975-0560-01-01 Revision B
equalization
charging stage
3–4
determining when complete
3–14
enabling
3–14
overview
1–8, 3–12
stopping manually
3–14
equalize LED
3–2
Equalize setting
2–4
error/warning LED
3–2
errors
clear manually
3–5
messages
3–7
overview
3–4
viewing active
3–5
viewing logs
3–11
exit button
Xantrex XW System Control Panel
B–2
F
F/W Rev setting 2–13
Fast Sweep
1–3
faults
clear manually
3–5
disable normal operation
3–5
messages
3–6
must be manually cleared
3–5
overview
3–4
viewing active
3–5
viewing logs
3–11
faults and warnings menu
3–4
FCC information
ix
float charging stage
1–5, 3–4
Float Voltage setting
2–6
Force Chg setting
2–5
G
Gateway. See Xantrex Gateway
green LED
3–2
H
harvest logs
daily
3–12
monthly
3–12
overview
3–11
requirements
3–11
yearly
3–12
I
input, configuring 2–7
interference, radio and television reception
ix
L
LEDs
flashing
3–2
overview
3–2
limitations on use
vii
Lo Pwr at Night setting
2–16
load control using auxiliary output
1–9
logs
daily
3–12
error
3–11
fault
3–11
harvest
3–11
monthly
3–12
warning
3–11
yearly
3–12
M
Manual Aux setting 2–9
manually
advancing charge stages
2–5
clearing faults, errors, or warnings
3–5
Max Chg Rate setting
2–5
maximum power point tracking
maximum power point curve
1–3
overview
1–3
voltage range
A–3
mechanical specifications
A–5
menu mapsXantrex XW System Control Panel
advanced configuration menu map
B–9
messages
errors
3–7
faults
3–6
warnings
3–9
meters screen
B–11
Mode setting
2–13
monthly logs
3–12
MPPT AutoTrack setting
2–8
MPPT Ref Volts setting
2–8
MPPT.
See maximum power point tracking
multiple units, copying settings
2–14
N
NetPS Night Dis setting 2–16
nighttime tare losses
2–16
no float charging stage
1–6, 3–4
not charging, charging stage
3–4
NOTICE, definition
iv