Installation Guide
Table Of Contents
- Conext™ SW Inverter Charger
- Exclusion for Documentation
- Document Number: 975-0638-01-01 Revision: Rev A Date: 12-2012
- Contact Information www.schneider-electric.com
- Information About Your System
- About This Guide
- Important Safety Instructions
- Precautions When Working With Batteries
- Regulatory
- FCC Information to the User
- Introduction
- Materials List
- Key Features
- Key Features Explained
- Multiple Unit Configuration
- Generator Support
- Basic Protection Features
- Components and Mechanical Features
- System Components
- Xanbus System
- Xanbus-enabled Products and Other Accessories
- Conext SW Inverter/Charger Mechanical Features
- Conext SW Front and Side Panels
- Conext SW AC/DC/Ports Side Panel
- Operation
- Start Up Behavior
- Inverter Operation Using the Front Panel
- Operating Limits for Inverter Operation
- Operating Limits for Charger Operation
- Inverter/Charger Operation using the System Control Panel (SCP)
- SCP Features
- Using the Standby Button
- SCP Navigation
- Changing Operational Settings
- Configuration via SCP
- Viewing the Firmware Revision Number
- Setting the Time and Date
- Viewing the Basic and Advanced Settings Menus
- Configuring Basic Settings
- Configuring Advanced Settings
- Inverter Settings Menu
- Charger Settings Menu
- AC Settings
- Gen Support Settings
- Multi Unit Config Menu
- Restoring Factory Default Settings
- Using the Advanced Features
- Configuration Sheet
- Troubleshooting
- General Troubleshooting Guidelines
- Inverter Applications
- View Device Info Logs
- Troubleshooting the Conext SW via the SCP
- Fault Detection Types
- Warning Types
- Specifications
- Inverter Specifications
- Charger Specifications
- AC Transfer Specifications
- Physical Specifications
- Environmental Specifications
- Regulatory
975-0638-01-01 Rev A iii
About This Guide
Purpose
The purpose of this Owner’s Guide is to provide explanations and procedures for
operating, troubleshooting, and maintaining the Conext SW Inverter/Charger.
Scope
The Guide provides safety guidelines, as well as information about operating and
troubleshooting the unit. It does not provide details about particular brands of
batteries. You need to consult individual battery manufacturers for this
information.
Audience
The Guide is intended for users and operators of the Conext SW Inverter/
Charger.
Organization
This Guide is organized into the following chapters.
Chapter 1, “Introduction” covers material list, key features, and basic protection
features.
Chapter 2, “Components and Mechanical Features” provides detailed
information on system components and the product’s main features.
Chapter 3, “Operation” provides operational instructions from the Front Panel
including operation using the System Control Panel (SCP).
Chapter 4, “Configuration via SCP” provides instructions to change inverter and
charger settings using the System Control Panel (SCP).
Chapter 5, “Troubleshooting” covers normal troubleshooting guidelines that also
includes fault detection and warning codes and how to interpret them.
Chapter 6, “Specifications” covers product specifications.
ConextSW-NA-OwnersGuide.book Page iii Thursday, December 20, 2012 2:00 PM