Product Manual
Table Of Contents
- Conext™ XW
- Inverter/Charger
- Conext™ XW
- Inverter/Charger
- About This Guide
- Important Safety Instructions
- Contents
- Introduction
- Monitoring Operation
- Configuration
- Using the Conext System Control Panel
- Using the Setup Menus
- Inverter Settings Menu
- Charger Settings Menu
- AC Input Settings
- Grid Support Settings
- Prioritizing and Managing Energy Sources with Advanced Features
- Generator Support Settings
- Auxiliary Output Settings
- Multi-Unit Config Menu
- Connections Menu
- Copying Settings From Another Unit
- Resetting the Conext XW+ to Default Settings
- Using the Advanced Features
- Troubleshooting
- Specifications
- Default Settings
Safety
viii 975-0240-01-01
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe
electrical work practices. See NFPA 70E or CSA Z462.
• This equipment must only be installed and serviced by qualified electrical
personnel.
• Never operate energized with covers removed
• Energized from multiple sources. Before removing covers identify all
sources, de-energize, lock-out, and tag-out and wait 2 minutes for circuits to
discharge
• Always use a properly rated voltage sensing device to confirm all circuits are
de-energized.
Failure to follow these instructions will result in death or serious injury.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Remove watches, rings, or other metal objects.
• This equipment must only be installed and serviced by qualified electrical
personnel.
• Keep sparks and flames away from the batteries.
• Use tools with insulated handles.
• Wear protective glasses, gloves and boots.
• Do not lay tools or other metal parts on top of batteries.
Failure to follow these instructions will result in death or serious injury.