Product Manual
Table Of Contents
- Conext™ XW
- Inverter/Charger
- Conext™ XW
- Inverter/Charger
- About This Guide
- Important Safety Instructions
- Contents
- Introduction
- Monitoring Operation
- Configuration
- Using the Conext System Control Panel
- Using the Setup Menus
- Inverter Settings Menu
- Charger Settings Menu
- AC Input Settings
- Grid Support Settings
- Prioritizing and Managing Energy Sources with Advanced Features
- Generator Support Settings
- Auxiliary Output Settings
- Multi-Unit Config Menu
- Connections Menu
- Copying Settings From Another Unit
- Resetting the Conext XW+ to Default Settings
- Using the Advanced Features
- Troubleshooting
- Specifications
- Default Settings
Safety
975-0240-01-01 ix
Limitations on Use
Explosive Gas Precautions
Working in the vicinity of lead acid batteries is dangerous. Batteries generate
explosive gases during normal operation. Therefore, you must read this Guide
and follow the instructions exactly before installing or using your inverter/charger.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Battery Circuit Breakers must be installed according to the specifications
and requirements defined by Schneider Electric.s.
• Servicing of batteries must only be performed by qualified personnel
knowledgeable about batteries and the required precautions. Keep
unqualified personnel away from batteries.
• Disconnect the charging source prior to connecting or disconnecting battery
terminals.
Failure to follow these instructions will result in death or serious injury.
WARNING
LIMITATIONS ON USE
The Conext XW+ Inverter/Charger is not intended for use in connection with
life support systems or other medical equipment or devices.
Failure to follow these instructions can result in death or serious injury.
WARNING
EXPLOSION HAZARD
This equipment is not ignition protected. To prevent fire or explosion, do not
install this product in locations that require ignition-protected equipment. This
includes any space containing gasoline-powered machinery, fuel tanks, as
well as joints, fittings, or other connections between components of the fuel
system.
Failure to follow these instructions can result in death or serious injury.