Manualshelf

Data Sheet

ManualsBrandsSCHNEIDER ELECTRIC ManualsRelaysPlug-in relay 1 pc(s) 24 Vdc, 24 V AC 6 A 1 change-over Schn
12
Product data sheet
Characteristics
RSL1PVBU
slim relay mounted on screw socket with LED
and protection circuit, 24 V
Main
Range of product Zelio Relay
Series name Interface relay
Product or component-
type
Plug-in relay
Device short name RSL
Contacts type and com-
position
1 C/O
Contact operation Standard
[Uc] control circuit volt-
age
24 V DC
[Ithe] conventional en-
closed thermal current
6 A at -40...55 °C
Status LED With
Shape of pin Flat (PCB type)
Sale per indivisible-
quantity
10
Complementary
Fixing mode Plastic compression spring
Average resistance 3390 Ohm (DC) at 23 °C +/- 10 %
[Ui] rated insulation voltage 277 V conforming to cUL
250 V conforming to EN/IEC
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC
Contacts material Silver alloy (AgSnO2)
[Ie] rated operational current 6 A 1 C/O (AC-1/DC-1) conforming to IEC/UL
Minimum switching current 100 mA
Maximum switching voltage 277 V
Switching voltage 12 V
Maximum switching capacity 1500 VA
150 W
Minimum switching capacity 120 mW
Operating rate <= 72000 cycles/hour no-load
<= 360 cycles/hour under load
Mechanical durability <= 10000000 cycles
Electrical durability 60000 cycles for resistive load (6 A at 250 V, AC-1)
Operating time 5 ms
12 ms reset
Marking CE
Protection category RT III
Operating position Any position
Height 78.6 mm
Width 6.2 mm
Depth 95 mm
Terminals description ISO n°1 (11-12-14)OC
(A1-A2)CO
Product weight 0.029 kg
Load current 6 A at 250 V AC for 0.5 mm mounting distance
Average coil consumption 0.17 W DC
Drop-out voltage threshold >= 0.05 Uc
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Jun 15, 2018
1

Summary of content (2 pages)