User Manual

10 of 20
5200UZI WHC2_5921 and 5200EZI WHC2_5922 USB ZB Interface and Ethernet ZB Interface User’s Manual
© 2012 Schneider Electric. All Rights Reserved.
4. Press and release the Setup button. This causes the interface unit to attempt to
join the ZigBee network using E-mode.
The ZigBee status LED should be in an orange -flashing state and then switch
to the green - continuous state.
Wiser Home Control Mk 2
USB ZB Interface
5200UZI WHC2_5921
Figure 7. USB ZB Interface installation in a Wiser Home Control
5. After the interface unit is connected to the ZigBee network, you can return the
network to normal operation. The ZigBee status LED should turn off to show
that the interface unit is connected to an active ZigBee network.
6. Use the Zoolkit wizard to find the USB ZB interface unit and to identify devices
on the ZigBee network. Refer to Zoolkit help files and tutorials for more
information .