Manual

0098441113480, V2.00, 03.2011
SD315O 3 Technical Data
Drive for stepper motors 25
3.4.2 Connectors
The connectors are available as a connector kit. See chapter 9 "Acces-
sories and spare parts".
Properties of connector CN1
Properties of connector CN2
Properties of connector CN3
Properties of connector CN4
3.4.3 Other accessories
DIN rail adapter The 35 mm DIN rail adapter is provided for a standard TH35 rail as per
IEC 60715. 2 fastening screws are included with this accessory.
EMC kit The EMC kit improves the EMC characteristics. Shielded cables must
be used with the EMC kit. The scope of supply of the EMC kit includes
two fastening screws and two shield clamps.
Designation Female header 2 pins 5.08, gold
contact, black
Type BLZF 5.08/02/180F AU BK
(Weidmüller)
Maximum connection cross sec-
tion
[mm
2
] 2.5 (AWG 14)
Stripping length [mm] 10
Designation Spring force connector, 11 pins
Type FK-MCP 1,5/11-ST-3,81
(Phoenix Combicon)
Maximum connection cross sec-
tion with wire ferrule without plastic
collar
[mm
2
] 1.5 (AWG 16)
Maximum connection cross sec-
tion with wire ferrule with plastic
collar
[mm
2
] 0.5 (AWG 22)
Stripping length [mm] 9
Designation Female header 4 pins 5.08, gold
contact, black
Type BLZF 5.08/04/180F AU BK
(Weidmüller)
Maximum connection cross sec-
tion
[mm
2
] 2.5 (AWG 14)
Stripping length [mm] 10
Designation Spring force connector, 12 pins
Type FK-MCP 1,5/12-ST-3,81
(Phoenix Combicon)
Maximum connection cross sec-
tion with wire ferrule without plastic
collar
[mm
2
] 1.5 (AWG 16)
Maximum connection cross sec-
tion with wire ferrule with plastic
collar
[mm
2
] 0.5 (AWG 22)
Stripping length [mm] 9