Specifications

5
LIGHTING CONTROL AND
INTEGRATED HOME SYSTEMS
5-22
© 2012 Schneider Electric
All Rights Reserved
www.schneider-electric.us
Occupancy Sensors Lighting Control
Class 1200
Fixture Mounted Sensors and Controls
Schneider Electric extends its occupancy-sensing capability with a range of line voltage sensors based on
passive infrared (PIR) technology. These sensors feature rugged housings that resist moisture and dust typical
of manufacturing and shipping dock areas. Sensors incorporate universal power supply, relay and PIR element
in a single housing ready for direct attachment to popular high-bay and low-bay luminaires.
Sensors are available either as stand alone sensor-per-fixture devices or equipped with connectors for low-cost
plastic optical fiber cable. Plastic optical fiber connectivity between sensors allows implementation of control
zones within aisles and work areas without back-pulling signaling wire in conduit. Each sensor acts as a
network repeater, allowing 200 foot spacing between sensors. Plastic fiber can be cut and terminated without
special tools or installer training.
• All sensors feature oversized Fresnel lenses and premium, low-noise pyroelectric elements for reliable PIR sensing at
mounting heights up to 45 feet.
• Both area- and aisle-sensing Fresnel lenses ship with each sensor. Color-coded snap-out lenses can be swapped in the
field.
• Switch packs open and close based on fiber optic commands from fiber sensors
• Universal power supply design adapts to 120–480 Vac, 50/60 Hz without jumpers or taps.
• Single-pole/close-on-motion relays sized for switching dry contact, magnetic HID or electronic ballast loads.
• Mounts directly to reflector with included pinch bracket or to ballast housing with ” NPT threaded pipe nipple.
• Built-in manual override test switch and diagnostic LED to assist in installation. Diagnostic LED can be seen at distance to
assist in walk test.
• Fifteen minute power ON warm-up timer assures rated lamp life even if the fiber network is broken.
• User adjustable sensitivity and delay time settings (0–15 minutes)
Fluorescent High Bay Sensors
The SLSFPS1347 and SLSFPS1480 Occupancy Sensors are Class 1, fixture mounted, 360° high bay
occupancy sensors. They are designed to operate directly with T5 and T8 fluorescent fixtures that use
single or multiple electronic ballasts. Motion is detected using passive infrared technology (PIR). The
operation voltage range for the SLSFPS1347 Sensor is 120–347 V. The SLSFPS1480 Sensor operates at
480 V.
Features
• Includes a user-adjustable time dial to set the length of time the luminaires stay on from 15 seconds to 30 minutes.
• Includes a user-adjustable range dial to customize PIR sensitivity.
• Includes a user-adjustable time dial to set the length of time the luminaires stay on from 15 seconds to 30 minutes.
• Includes a user-adjustable range dial to customize PIR sensitivity.
• 90 degree rotating lens for a variety of aisle-way applications.
• High bay area, low bay area, and high bay aisle lenses provided.
• 18 minutes time-out preset for maximum energy to lamp life savings.
UL 924 Emergency Control Devices
Schneider Electric UL 924 Emergency Lighting Control Devices provide the ability to use and control standard
fixtures for emergency and standard lighting. The use of UL 924 emergency lighting control device, under
normal operating power the devices turn on and off emergency lighting along with standard lighting in an area.
In the event of normal power loss the UL 924 emergency lighting control devices detect the power loss, and will
automatically transfer emergency power to the fixtures. This provides emergency lighting through standard
fixtures. Schneider Electric provides a wide selection of UL 924 emergency lighting control devices that work
with occupancy and dimming based lighting control.
Features
• Saves energy by controlling Emergency Lighting
• Multiple mounting methods
• Convenient test switch
• Works with occupancy or dimmer controls
• Visible Power LED
• Easy to install
Table 5.38: Table Line Voltage Occupancy Sensors
Catalog No. Catalog Description $ Price
SLSPIP210 Occupancy sensor, indoor PIR, no fiber connectivity 141.00
SLSPIP210CT Occupancy sensor, indoor PIR, no fiber, cold temperature 174.00
SLSPIP210EB Occupancy sensor, indoor PIR, no fiber, electronic ballast 141.00
SLSPIP210EBCT Occupancy sensor, indoor PIR, no fiber, electronic ballast cold temperature 174.00
SLSPIP211 Occupancy sensor, indoor PIR, one fiber input, one fiber output 166.00
SLSPIP212 Occupancy sensor, indoor PIR, two fiber inputs 166.00
SLSPSP101 Fiber optic switch pack, indoor, one fiber in, one fiber output 141.00
SLSPSP102 Fiber optic switch pack, indoor, two fiber inputs 141.00
SLSPCW001 Fixture-mounted counterweight for HID 13.00
SLSPIPBRACKET Bracket for off-fixture mounting 11.00
Table 5.39: Specificiations
Catalog No. Catalog Description $ Price
SLSFPS1347 120–347 Vac High bay Occupancy Sensor 78.00
SLSFPS1480 480 Vac High Bay Occupancy Sensor 89.00
Table 5.40: Specificiations
Catalog No. Catalog Description $ Price
SLSEDC120 UL 924 Emergency Lighting Dimmer Control 120 Vac 700.00
SLSEDC277 UL 924 Emergency Lighting Dimmer Control 277 Vac 700.00
SLSEPMC120 UL 924 Emergency Lighting Control Relay Panel Mount 120 Vac 300.00
SLSEPMC277 UL 924 Emergency Lighting Control Relay Panel Mount 277 Vac 300.00
SLSERC1277 UL 924 Emergency Lighting Control Relay 120/277 Vac 300.00
Indoor Occupancy Sensor
Fluorescent High Bay Sensor
UL 924 Emergency Control Device
DE-8A
Discount
Schedule
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com