User`s guide

63249-420-267A2 Multi Room Audio Amplifiers

06/2010 User's Guide

Changing Speaker Wires

If it becomes necessary to change speaker wire connections, power

off the amplifier. Be sure to remove the power supply from the wall

power outlet.

NOTE: Unplugging the power supply causes the amplifier to return

to its default values for volume and tone settings or to the settings

programmed using C-Bus Toolkit. To restore power to the

amplifiers, follow the instructions in the Powering On the Amplifiers

section.

HAZARD OF IMPROPER AUDIO, C-BUS AND SPEAKER

CONNECTIONS

 Verify all audio and C-Bus cables are connected to the

appropriate terminal location of each unit.

 Verify that all speakers are connected in phase. Follow the

manufacturer's wiring instructions.

Failure to follow these instructions can result in equipment

damage, improper operation, or poor sound quality.

Contact your C-Bus Installer if you are unsure about cable

connections or terminals.