Products Guide Lighting Control and Integrated Home Systems SM Make the most of your energy
Contents Occupancy Sensors Introduction Wall Switch Occupancy Sensors Ceiling Mounted Occupancy Sensors Wall Mounted Occupancy Sensors Power Pack & Auxiliary Relays High Bay HID Technical Section Track-limiting Panels Track-limiting Panels 1-22 1 3 11 14 17 18 19 23-26 25 Powerlink® Lighting Control 27-46 28 29 30 31 33 34 35 37 38 39 40 41 C-BusTM Lighting Control 47-85 48 49 55 58 67 70 76 Introduction G3 Panelboards NF Panelboards G3 Remotely-operated Circuit Breakers G3 Control Bus Power Supply
C-Bus Area Lighting Panels Introduction C-Bus Enclosures Technical Section C-Bus Multi-room Audio, Remote Controls and IR Accessories Introduction Matrix Switcher Multi-room Amplifiers Distribution Unit Speakers Universal Remote 4 & 8 Button Remotes IR Accessories Technical Section C-Bus HVAC Controls 85-108 86 88 94 Introduction Basic and Programmable Thermostats Technical Section C-Bus RF Wireless Controls 109-120 110 111 112 113 114 115 116 117 118 121-124 122 123 124 Introduction 600W Di
Occupancy Sensors 1
Introduction to Occupancy Sensors Occupancy sensors help building owners achieve energy savings and energy code compliance with sensors that are easy to select, install and commission. Employing passive infrared (PIR), ultrasonic and dual technology to accurately detect occupancy and control lighting loads, occupancy sensors automatically shut-off lighting in unoccupied areas – eliminating waste, reducing energy costs and meeting code requirements.
occupancy sensors + Wall Switch occupancy sensors Wall Switch Occupancy Sensor Schneider Electric Wall Switch Occupancy Sensors employ the latest passive infrared (PIR) technology to automatically control lighting in offices, private restrooms and employee break rooms. Each Sensor employs a special 180° multi-segmented lens and PIR motion detector circuit to detect motion. This unit will automatically switch the lights off after a preset delay if no motion is detected.
occupancy sensors + Wall Switch occupancy sensors Wall Switch Occupancy Sensor w/Manual On Schneider Electric Wall Switch Occupancy Sensor with Manual-On employs the latest passive infrared (PIR) technology to automatically control lighting in offices, employee break rooms and utility rooms. For maximum energy savings, the Schneider Electric Wall Switch Occupancy Sensor with Manual-On requires the user to switch on lighting manually by pressing the button on the front.
occupancy sensors + Wall Switch occupancy sensors Commercial Grade Occupancy Sensor PIR Single Circuit Wall Switch Schneider Electric Single Circuit PIR Wall Switch Occupancy Sensor with Light Level features passive infrared (PIR) technology to conveniently control lighting in offices, private bathrooms, utility rooms and employee break rooms. Low profile sensor available in white, ivory, gray, light almond and black with color-matched segmented lens to meet any décor need.
occupancy sensors + Wall Switch occupancy sensors Commercial Grade Occupancy Sensor PIR Dual Circuit Wall Switch Dual Circuit Wall Switch Occupancy Sensors independently control two lighting circuits with bi-level switching to reduce lighting by 50% which may be required by energy codes. The dual circuit wall switch occupancy sensor employs passive infrared (PIR) technology and a 180 degree segmented lens to achieve minor motion coverage up to 300 square feet (27.87 sq.
occupancy sensors + Wall Switch occupancy sensors Commercial Grade Occupancy Sensor Ultrasonic Single Circuit Wall Switch Schneider Electric Single Circuit PIR Wall Switch Occupancy Sensor with Light Level features passive infrared (PIR) technology to conveniently control lighting in offices, private bathrooms, utility rooms and employee break rooms. Low profile sensor available in white, ivory, gray, light almond and black with color-matched segmented lens to meet any décor need.
occupancy sensors + Wall Switch occupancy sensors Commercial Grade Occupancy Sensor Ultrasonic Dual Circuit Wall Switch Dual Circuit Wall Switch Occupancy Sensors independently control two lighting circuits with bi-level switching to reduce lighting by 50% which may be required by energy codes. The dual circuit wall switch occupancy sensor employs passive infrared (PIR) technology and a 180 degree segmented lens to achieve minor motion coverage up to 300 square feet (27.87 sq.
occupancy sensors + Wall Switch occupancy sensors Commercial Grade Occupancy Sensor Dual Technology Single Circuit Wall Switch Schneider Electric Single Circuit PIR Wall Switch Occupancy Sensor with Light Level features passive infrared (PIR) technology to conveniently control lighting in offices, private bathrooms, utility rooms and employee break rooms. Low profile sensor available in white, ivory, gray, light almond and black with color-matched segmented lens to meet any décor need.
occupancy sensors + Wall Switch occupancy sensors Commercial Grade Occupancy Sensor Dual Technology Dual Circuit Wall Switch Dual Circuit Wall Switch Occupancy Sensors independently control two lighting circuits with bi-level switching to reduce lighting by 50% which may be required by energy codes. The dual circuit wall switch occupancy sensor employs passive infrared (PIR) technology and a 180 degree segmented lens to achieve minor motion coverage up to 300 square feet (27.87 sq.
occupancy sensors + Ceiling Mounted occupancy sensors Ceiling Mounted Occupancy Sensor PIR Ceiling Mounted Passive Infrared (PIR) Occupancy Sensor accurately detects occupancy and automatically switches lighting on and off as needed. This low profile sensor is ceiling mounted for superior motion detection. With a 360 degree field of view and up to 1000 square feet (92.90 sq.
occupancy sensors + Ceiling mounted occupancy sensors Ceiling Mounted Occupancy Sensor Ultrasonic The Ceiling Mounted Ultrasonic Occupancy Sensor accurately detects occupancy and automatically switches lighting On and Off as needed. This low profile sensor is ceiling mounted for superior motion detection over partitions and other common obstructions. With a 360 degree field of view and up to 2000 square feet (185.8 sq.
occupancy sensors + Ceiling Mounted occupancy sensors Ceiling Mounted Occupancy Sensor Dual Technology The Mounted Dual Technology Occupancy Sensor employs both passive infrared (PIR) and ultrasonic technology to accurately detect occupancy and automatically turn on lighting. To reduce the occurrence of false-on events, this sensor employs PIR technology to detect major motion.
C-BusTM occupancy sensors + Wall Mounted occupancy sensors Wall Mounted Occupancy Sensor PIR Schneider Electric Wall Mounted Passive Infrared (PIR) Occupancy Sensor accurately detects occupancy and automatically switches lighting on and off as needed. This sensor is wall or ceiling mounted for superior motion detection. The PIR Occupancy Sensor includes 3 interchangeable lenses for custom coverage patterns.
C-BusTM occupancy sensors + Wall Mounted occupancy sensors Wall Mounted Occupancy Sensor Ultrasonic Schneider Electric® Wall Mounted Ultrasonic Occupancy Sensor accurately detects occupancy and automatically switches lighting on and off as needed. This low profile sensor is wall or ceiling mounted for superior motion detection over partitions and other common obstructions.
C-BusTM occupancy sensors + Wall Mounted occupancy sensors Wall Mounted Occupancy Sensor Dual Technology Schneider Electric® Wall Mounted Dual Technology Occupancy Sensor employs both passive infrared (PIR) and ultrasonic technology to accurately detect occupancy and automatically turn on lighting. To reduce the occurrence of false on events, this sensor employs PIR technology to detect major motion.
occupancy sensors + Power Pack and auxiliary relay Power Pack and Auxiliary Relay The Power Pack supplies low voltage power to Schneider Electric ceiling and wall mounted occupancy sensors, and employs a heavy duty 20A relay to switch lighting and HVAC loads based on a control signal received from the occupancy sensor.
occupancy sensors + High Bay occupancy sensors High Bay Occupancy Sensor HID Schneider Electric High Bay HID Basic, Single and Dual Output Occupancy Sensors work with a single HID (high intensity discharge) luminaire to reduce the lamp wattage by approximately 50% and then return the lamp wattage to 100% when occupancy is detected in an aisle or room. Motion is detected using passive infrared (PIR) technology.
occupancy sensors + technical section Wall Switch Occupancy Sensor 35 ft. (10.7 m) 4 ft. (31.2 m) Auto 35 ft. (10.7 m) 10 ft. (3.1 m) 15 ft. (4.6 m) 25 ft. (7.6 m) Sensor field of view Sensor features Commercial Grade Occupancy Sensors PIR Wall Switch Manual 35 ft. (10.7 m) 6 ft. (1.83 m) 9 ft. (2.74 m) 21 ft. (6.4 m) Sensor Wiring, Dual Circuit Sensor Wiring, Bi-level (7.62 m) (9.75 m) 4 ft. (1.2 m) 35 ft. (10.7 m) Side view of sensor field of view (2.
occupancy sensors + technical section Commercial Grade Occupancy Sensors Dual Technology Wall Switch 4 ft. (1.22 m) 35 ft. (10.67m) 35 ft. (10.67 m) 20 ft. (6.1 m) 27 ft. (8.23 m) Dual Technology Sensor Field of View, Side 10 ft. 6 ft. (1.83 m) (3.05 m) 13.5 ft. (4.11 m) 9 ft. (2.74 m) 21 ft. (6.4 m) Sensor Wiring, Bi-level Single and Dual Technology Sensor Field of View, Top Sensor Wiring, Dual Circuit Ceiling Mounted Occupancy Sensor PIR (7.62 m) (9.75 m) 4.5 in. (115 mm) 9 ft.
occupancy sensors 30 ft. + technical section Ceiling Mounted Occupancy Sensor Dual Technology 24 ft. 42 ft. 48 48ft.ft. 25 ft. 30 30ft. ft. 32 ft. 24 24 ft. ft. 42 42ft.ft. 4.5 in. (115 mm) Area of Detection Ultrasonic MajorMotion Motion Ultrasonic Major Ultrasonic MajorMotion Motion Ultrasonic Minor PIR MajorMotion Motion PIR Major PIR MajorMotion Motion PIR Minor 1.75 in. (44 mm) 25 25ft.ft. 32 ft. 32 ft.
occupancy sensors + technical section Wall Mounted Occupancy Sensor Dual Technology 48 25 16 11 0 11 16 25 48 8 0 0 3 15 23 32 48 72 Power Pack and Auxiliary Relay 3 in. (76 mm) 3 in. (76 mm) 2.25 in.
Track-Limiting Panels 23
Introduction to Track-Limiting Panels Energy codes typically require lighting power density calculations for track lighting to be based on the linear feet of installed track. Some codes stipulate multipliers as low as 30W per foot of track, while others use a multiplier as high as 70W per foot of track. When energy efficient lighting is used, the connected load is typically much less than the per-foot multipliers given in the energy codes.
schneider Electric track-limiting panels + track-limiting panels Track-Limiting Panels Track-Limiting Panels eases the burden of meeting today’s stringent energy codes like California Title 24. Typically used for track lighting applications, these panels limit the power available to a lighting branch circuit by incorporating a special circuit breaker into the branch circuit.
schneider Electric track-limiting panels + track-limiting panels Energy codes typically calculate track lighting loads based on linear feet of installed track. Some codes use a multiplier as low as 30 watts/foot while others use a multiplier as high as 70 watts/foot. When using the energy efficient lighting technologies available today, the connected load is typically much less than the per-foot multipliers used by most energy codes.
Powerlink Lighting Control ® 27
Introduction to Powerlink® Lighting Control For many designers, the engineering of a suitable lighting control system has become a daunting task. The designer must balance space constraints, equipment/installation costs, maintenance and operational concerns, while ensuring a code-compliant installation.
Powerlink® Lighting Control + Panel Boards Powerlink® G3 Panel Mounted Components Up to eight panels can be operated from a single controller. A self-contained power supply furnishes the power for remotely operated circuit breaker switching and for the system’s electronics. The intelligence of the Powerlink G3 system comes from its microprocessor- based controller.
Powerlink® Lighting Control + Panel Boards NF Panelboards, Column Width & Custom Panel Boards The NF Panelboard offers superior performance and application flexibility for commercial and industrial electrical systems up to 480Y/277V. Schneider Electric is the only lighting control supplier that offers a full range of enclosure options including NEMA Type 3R, 5 and 12.
Powerlink® Lighting Control + Circuit Breakers Powerlink® Remotely Operated ECB-G3 Circuit Breakers Powerlink® G3 remotely operated circuit breakers are designed for installation in Schneider Electric NF Lighting Panelboards as part of the Schneider Electric Powerlink G3 Lighting Control System. These circuit breakers provide the same overcurrent protection as found in standard circuit breakers.
Powerlink® Lighting Control + Circuit Breakers ECB-G3EL Remotely Operated Circuit Breakers for Emergency Lighting Circuits Powerlink® ECB-G3EL circuit breakers provide a means to comply with the requirements of the NEC, 700.12(E). The circuit breaker contains both a remotely operated switched circuit for controlling the luminaires, and a manually operated unswitched circuit, which provides power to the unit emergency equipment’s charging and detection circuit.
Powerlink® Lighting Control + Control Bus Powerlink® G3 Control Bus Powerlink® G3 Control Buses provide the interface between the system controller and remotely operated circuit breakers. Specifically, they distribute 24Vdc switching power and control signals to switch remotely operated circuit breakers and report circuit breaker status back to the system controller. One to four control bus strips can be mounted in a single panelboard.
Powerlink® Lighting Control + Power Supply Powerlink® Power Supply Powerlink® G3 Power Supply provides power to operate the controller, control buses and remotely operated circuit breakers. The power supply attaches to an NF Panelboard interior in the same manner as a standard 3-pole circuit breaker.
Powerlink® Lighting Control + Controllers Powerlink® Controllers Powerlink® G3 product line offers a simple, cost-effective means for controlling branch lighting circuits. Five distinct systems provide a variety of capabilities to meet virtually any need. 500 Level System • Designed to be used in conjunction with other control devices such as: External time clocks, access readers, occupancy sensors, or other building systems.
Powerlink® Lighting Control + Controllers Controller Feature Comparison System Level Feature 500 1000 2000 3000 2-wire 8 16 16 16 2-wire with status feedback 8 8 8 8 3-wire 8 8 8 8 2-wire normally open (NO) or normally closed (NC) X X X X 2-wire NO or NC, with automatic blink notification X X X X 2-wire maintained toggle X X X X 2-wire momentary toggle X X X X 2-wire momentary ON or momentary OFF X X X X 3-wire momentary X X X X Input timers (1 sec.
Powerlink® Lighting Control + Controllers Powerlink® Remote Source Controller The Powerlink® Remote Source Controller (RSC) provides additional scheduling and dry-contact inputs via high speed Ethernet connectivity that links a wide variety of input devices to a 2000 or 3000 level Square D Powerlink system. Product Features • High Speed Connectivity • Ethernet communication eliminates bottlenecks typically associated with serial devices. • Uses existing LAN infrastructure to reduce input wiring cost.
Powerlink® Lighting Control + Accessories Accessories Slave Address Selector The Slave Address Selector is required for each slave panel connected to a subnet. The slave address selector establishes a unique system address for the panel that is both essential for system operation and useful when the system is accessed from a remote location. The slave address selector plugs directly onto control buses.
Powerlink® Lighting Control + Power supply Powerlink® Device Power Supply The Powerlink® Device Power Supply is used to distribute power on a C-BusTM network. Placed on the network, device power supplies will provide the current necessary for operating a variety of passive Schneider Electric C-Bus devices. A Device Power Supply consists of a 8M enclosure containing one or two Power Supplies (120 or 277Vac).
Powerlink® Lighting Control + Device router Powerlink® Device Router The Powerlink® Device Router allows the exchange of data between a Powerlink NF3000G3C controller and Schneider Electric C-BusTM devices. The bidirectional device router can receive data from the C-Bus input devices and send the data to the Powerlink panel/network. It can also receive data such as a contact closure from the Powerlink input and send that data to a C-Bus output/network.
Powerlink® Lighting Control + technical section Dimensional Drawings NF Panelboard (indoor enclosure) Flush Mounting W + 1.50 (38mm) Surface Mounting W + 0.12 (3mm) Flush Mounting W + 1.50 (38mm) Surface Mounting W + 0.12 (3mm) Max. Main Lug Ampere Rating H H 5.75 in. (146 mm) Typical Enclosure Side View Typical Enclosure Front View *These dimensions are standard. Please consult factory for special requirements. Max. Number of Circuits (H) Enclosure Height In. mm Max.
Powerlink® Lighting Control + technical section Short Circuit Current Rating Table This table lists the UL short-circuit current ratings for NF panelboards including ECB-G3 circuit breakers. The ratings apply to an integral main located in the same enclosure or a remote main located in a separate enclosure. NF Panelboard SCCR Table Max. System Voltage Max.
Powerlink® Lighting Control + technical section Wiring Diagrams This section contains wiring diagrams for the Schneider Electric Powerlink® G3 systems Typical Low Voltage Input Connections Various Low Voltage Switch Types Typical Switch Types Wired in Parallel Typical Photo Controller Wiring Diagram 43
Powerlink® Lighting Control + technical section System Architecture Three levels of communications are provided that can be easily tailored to individual application requirements. Subnet Communications • Each Schneider Electric Powerlink® G3 Controller can directly operate up to eight control buses. • Controller signals the control buses to switch the associated branch circuits and polls each Schneider Electric Powerlink G3 Circuit Breaker to determine its actual status.
Powerlink® Lighting Control + technical section Ethernet Connectivity Schneider Electric Powerlink® G3 2000 and 3000 level controllers have integrated onboard Ethernet capability. In addition to providing highspeed Ethernet access, these controllers allow fast peer-to-peer (P2P) connectivity between panels. With 2000 and 3000 level systems, master panels can share inputs, schedules, and zone status.
Powerlink® Lighting Control + technical section C-BusTM Network Below is a typical one-line diagram for creating a local area network using the C-BusTM Network capability of level 3000G3C controllers. All cables shown below are CAT-5.
C-Bus Lighting Control TM 47
Introduction to C-BusTM Lighting Control The availability of low-cost, powerful microprocessors for building and home control and management systems has created unprecedented customer expectations for increased control, connectivity and integration of electrical and low-voltage systems. Sophisticated styling C-BusTM brings a distinctly sophisticated look to lighting applications. Clean lines. Sleek glass.
C-BusTM Lighting Control + Keypads Neo™ Keypads The C-BusTM Neo™ Keypads offer localized finger-tip control of lighting and other electrical devices. With over 1,000 custom color combinations available, these elegant keypads are suitable for virtually any decor. One compact Neo keypad can take the place of many single switches, ON/OFF toggles, dimmers, and timers.
C-BusTM Lighting Control + Keypads SaturnTM Keypads The C-BusTM SaturnTM Keypads offer localized finger-tip control of lighting and electrical services. These elegant keypads incorporate a unique glass cover plate that is easy to install, customize, and use. By virtue of the variety of button configurations available, one compact Saturn keypad can take the place of many single operation switches, ON/OFF toggles, dimmers, and timers.
C-BusTM Lighting Control + Keypads Neo™ Keypads with Dynamic Labeling Technology™ The C-BusTM Neo™ Keypads with Dynamic Labeling Technology™ (DLT) combine a Neo style cover plate, programmable keypad buttons, and easily customized labels on a backlit LCD screen that eliminates the need for custom labels. These keypads are designed to be easy to install, customize, and use.
C-BusTM Lighting Control + Keypads Saturn™ Keypads with Dynamic Labeling Technology™ The C-BusTM Saturn™ Dynamic Labeling Technology™ (DLT) Keypads combine a Saturn style glass cover plate, programmable keypad buttons, and easily customized labels on a backlit LCD screen that eliminates the need for custom labels. These keypads are designed to be easy to install, customize, and use.
C-BusTM Lighting Control + Keypads Neo™ Decorator Style Keypads Schneider Electric C-BusTM Decorator Style NeoTM Keypads offer localized finger-tip control of lighting and electrical services. These elegant keypads incorporate a unique cover plate (ordered separately) that is easy to install, customize, and use. These Decorator style keypads are ordered without a face plate and can fit in any existing Decorator style keypad face plate. Matching face plates are also available in a variety of colors.
C-BusTM Lighting Control + Keypads Saturn™ Decorator Style Keypads Schneider Electric C-BusTM Decorator Style SaturnTM Keypads offer localized finger-tip control of lighting and electrical services. These elegant keypads incorporate a unique glass face plate that is aesthetically pleasing with silver buttons that glow blue or amber. Also, these Decorator style keypads can be ordered separately without a face plate to fit in any existing Decorator style keypad cover plate.
C-BusTM Lighting Control + Touch screens Mark II Touch Screen The Mark II Touch Screen is a unified wall-mounted panel for controlling lighting systems and accessories with the touch of a finger. Designed with versatility in mind, these sleek touch screens are easy to install, customize, and use.
C-BusTM Lighting Control + Touch screens Mark II Desktop Touch Screen The Mark II Desktop Touch Screen is a unified panel for controlling lighting systems and accessories with the touch of a finger. Designed with versatility in mind, these sleek touch screens are easy to install, customize, and use.
C-BusTM Lighting Control + Touch screens Color Touch Screen The C-BusTM Color Touch Screen is a unified panel for controlling lighting systems and accessories with the touch of a finger. The touch screen's sophisticated appearance reflects the underlying craftsmanship of its design.
C-BusTM Lighting Control + system units C-BusTM Ethernet Network Interface The Schneider Electric C-Bus™ Ethernet Network Interface unit is a C-Bus system support device designed to provide an isolated communications path between an Ethernet Network and a C-Bus Network. The following functions can be achieved through this interface: programming C-Bus Units, issuing commands to a C-Bus Network including scheduled activities as well as monitoring and data logging of activities on a C-Bus Network.
C-BusTM Lighting Control + system units C-BusTM PC Interface The C-BusTM PC Interface (PCI) expands options for configuring, controlling, and monitoring C-Bus networks by providing an interface between the network and a personal computer (PC) or other external device. The C-Bus PCI module easily mounts to a DIN rail and connects to external devices through its built-in connector ports. Power to the unit is provided through the C-Bus network.
C-BusTM Lighting Control + system units C-BusTM PC Interface USB The C-BusTM PC Interface (PCI) expands options for configuring, controlling, and monitoring C-Bus networks by providing an interface between the network and a personal computer (PC) or other external device. The C-Bus PCI module easily mounts to a DIN rail and connects to external devices through its built-in connector ports. Power to the unit is provided through the C-Bus network.
C-BusTM Lighting Control + system units C-BusTM Network Bridge The C-BusTM Network Bridge provides a communication channel between C-Bus units on separate networks, expanding the total number of units that can be configured, controlled, and monitored. Network Bridge Technical Information Voltage Requirements Product Features 15–36Vdc @ 18 mA required for normal operation, drawn from each connected C-Bus network 3.
C-BusTM Lighting Control + system units C-BusTM Power Supply The C-BusTM Power Supply is specifically designed to operate with the C-Bus network as a power source for passive C-Bus devices. The power supply mounts to a DIN rail and connects to the C-Bus network through built-in RJ-45 connectors. These devices are UL listed as Class 2 power supplies and are suitable for parallel operation. Up to five power supplies can be connected to a single C-Bus network.
C-BusTM Lighting Control + system units Powerlink® Device Power Supply The Powerlink® Device Power Supply is used to distribute power on a C-BusTM network. Placed at critical points on the network, device power supplies will provide the current necessary for operating a variety of passive Schneider Electric C-Bus devices. A Powerlink Device Power Supply consists of a C-Bus 8M enclosure containing one or two 4M Power Supplies.
C-BusTM Lighting Control + system units Powerlink® Device Router The Powerlink® Device Router allows the exchange of data between a Powerlink NF3000G3C controller and Schneider Electric C-BusTM devices. The bidirectional device router can receive data from C-Bus input devices and send the data to the Powerlink panel/network. It can also receive data such as a contact closure from the Powerlink input and send that data to a C-Bus output/network.
C-BusTM Lighting Control + system units C-BusTM Pascal Automation Controller The C-BusTM Pascal Automation Controller (PAC) provides extended conditional and real-time event programming to C-Bus systems. The PAC supports a full range of programming commands including conditional logic, flow control, variables and scheduling. Systems integrators will appreciate the built-in scheduling tools, scene tools, and wizards for creating basic logic programs.
C-BusTM Lighting Control + system units C-BusTM Telephone Interface Unit The C-Bus™ Telephone Interface offers a dial-in and dial-out functionality, permitting control and status monitoring for a C-Bus system. It also includes an audio output, so that C-Bus events can be audibly announced. The Telephone Interface is programmed using a connection to a PC running special configuration software. The interface can also act as a C-Bus PC Interface.
C-BusTM Lighting Control + input units C-BusTM General Input Unit The C-BusTM Four-Channel General Input Units are DIN-rail mounted devices that measure TTL digital and real-world analog quantities and generate messages about the measurements to the C- Bus network. By acting as an interface with various external sensors, the general input unit enables integration of the C-Bus network with a variety of system types, such as those for HVAC and for power monitoring.
C-BusTM Lighting Control + input units C-BusTM Bus Coupler The C-BusTM Bus Couplers are non-isolated input devices that provide an interface between dry-contact mechanical switches and a C-Bus network. The bus coupler increases the versatility of the C-Bus network by facilitating remote access with any drycontact switch mechanism offered by Schneider Electric and other manufacturers.
C-BusTM Lighting Control + input units C-BusTM Four-Channel Auxiliary Input The C-BusTM Four-Channel Auxiliary Inputs are isolated four-channel input units that provide an interface between voltage-free mechanical switches and a C-Bus network. An auxiliary unit increases the versatility of the C-Bus network by facilitating remote access with any dry-contact switch mechanism offered by Schneider Electric or other manufacturers.
C-BusTM Lighting Control + sensors C-BusTM Indoor PIR Occupancy Sensor The C-BusTM Indoor PIR Occupancy Sensor provides reliable thermal-radiation-based control of lighting and other C-Bus output devices. Suitable for wall or ceiling mounting, this sensor offers a continuous detection field of 400 square feet and a 90° field of view. The entire detection field has uniform sensitivity and no dead zones, making it an ideal lighting-control solution for offices, corridors, and conference rooms.
C-BusTM Lighting Control + sensors C-BusTM 360° PIR Occupancy Sensor The C-BusTM 360° Indoor PIR Occupancy Sensor combines a passive infrared receiver (PIR) for occupancy sensing and a light-level sensor into a small, highly versatile unit. The multi-sensor’s 2.8 inch face diameter makes it unobtrusive and ideally suited for flush mounting on the ceiling.
C-BusTM Lighting Control + sensors C-BusTM 360° PIR Multi-Sensor The C-BusTM 360° PIR Multi-Sensor combines a passive infrared receiver (PIR) for occupancy sensing, a light-level sensor, and an infrared remote receiver into a small, highly versatile unit. The sensor’s 2.8 inch face diameter makes it unobtrusive and ideally suited for flush mounting on the ceiling.
C-BusTM Lighting Control + sensors C-BusTM Outdoor Motion Sensor The C-BusTM Outdoor PIR Motion Sensor combines reliable thermal-radiation-based control of lighting with rugged construction suitable for outdoor requirements. The unit’s advanced circuits and flat multi-segmented lens provide coverage of up to 3000 square feet in a 110° field of view. The detection area incorporates a multi-faceted lens, which ensures fast response to motion and few dead zones.
C-BusTM Lighting Control + sensors C-BusTM Light-Level Sensor The C-BusTM Light-Level Sensor measures ambient light levels and automatically issues ON, OFF, or ramp commands over a C-Bus network. The light-level sensor can control relays, dimmers, or remotely operated circuit breakers, changing their status according to pre-set ambient lighting levels.
C-BusTM Lighting Control + sensors C-BusTM Outdoor Light-Level Sensor The C-BusTM light-level sensor measures ambient light levels and automatically issues ON/OFF or ramp commands over a C-Bus network to maintain outdoor lighting levels. Primarily designed for outdoor use, this light-level sensor is also suitable for indoor settings in which a water resistant casing is desirable.
C-BusTM Lighting Control + output units C-BusTM Professional Series Dimmer The C-BusTM Professional Dimmers are designed to control incandescent and compatible low-voltage lighting. These dimmers are ideal for tight space applications where traditional rack mounted assemblies are not practical. Professional dimmer units are available in 5 A (4 channels), 10 A (two channels), and 20 A (one channel) models.
C-BusTM Lighting Control + output units C-BusTM Phase Angle Dimmers The C-BusTM Phase Angle Dimmers are C-Bus controlled output units suitable for incandescent and compatible low-voltage lighting. These units are designed to be rack mounted in suitable DIN style enclosures. Each of the unit’s channels can independently control loads to create dynamic lighting scenes.
C-BusTM Lighting Control + output units C-BusTM 2 Channel DALI Gateway The C-BusTM Digital Addressable Lighting Interface (DALI) Gateway provides an isolated two-way communications path between a C-Bus network and two DALI networks, making it possible to use the C-Bus network to control and monitor DALI ballasts. The DALI gateway constantly monitors both DALI networks and can detect and report faulty lamps in fluorescent ballasts or non-functional DALI ballasts.
C-BusTM Lighting Control + output units C-BusTM 4 Channel 0-10V Fluorescent Ballast Dimmer The C-BusTM 4 Channel 0-10V Fluorescent Ballast Dimmer provides four channels of analog 0-10Vdc that can be used as the control signals for various peripheral devices, including electronically dimmable fluorescent lighting ballasts. This analog output unit can sink or source current as appropriate for the connected load, and produces 0-10 V in response to commands from the C-Bus network.
C-BusTM Lighting Control + output units C-BusTM 10 Amp Relay Unit The C-BusTM Relays are DIN-rail mounted units with four or twelve independent, voltage free, relay contacts for general switching applications. They are suitable for use with resistive, inductive, incandescent and fluorescent loads. Each channel is independently configurable and features a zero crossing magnetically latching relay designed for switching the harsh electrical loads associated with today’s high efficiency lighting systems.
C-BusTM Lighting Control + output units C-BusTM 20 Amp Relay Units The C-BusTM 20 Amp Relays are DIN-rail mounted units with four independent, voltage free, relay contacts. They are suitable for use with resistive, inductive, incandescent and fluorescent loads. Each channel is independently configurable and features a zero crossing magnetically latching relay designed for switching the harsh electrical loads associated with today’s high efficiency lighting systems.
C-BusTM Lighting Control + output units C-BusTM Changeover Relay Units The C-BusTM Changeover Relays are DIN-rail mounted devices with four independent, voltage free, changeover relay contacts. Schneider Electric C-Bus Changeover Relays are designed to operate three-speed motors and two-way motor control devices.
C-BusTM Lighting Control + output units C-BusTM Low Voltage Relay The C-BusTM 8 Channel Low Voltage Relay is used for switching loads such as irrigation solenoids, and LV air conditioning dampers. The Relay may also be used for switching LV pulse signal control loads into third party products. The C-Bus 8 Channel Low Voltage Relay is a C-Bus output device that controls eight low voltage relay channels. The unit is powered from the C-Bus network and requires no other power source.
84
C-Bus Enclosures and Area Lighting Panels TM 85
Introduction to C-BusTM Enclosures and Area Lighting Panels Area lighting panels from Schneider Electric are a simple, convenient way to area dimming and multi-scene controls, as well as daylight harvesting schemes in an individual conference room or suite within a commercial building. They are ideally suited to meet energy code requirements related to reduction in lighting loads by dimming, or integrating natural light with artificial light.
C-BusTM Lighting Control + Area lighting Panel C-BusTM Area Lighting Panels The C-BusTM Area Lighting Panels are ideally suited to meet lighting control energy code requirements in classrooms, offices and other small spaces. These devices provide the ability to integrate keypads, occupancy sensing, light level detection, and switching without the mess of complex control wiring. A simple CAT-5 cable is all that is required to connect sensors and keypads.
C-BusTM Lighting Control + enclosures C-BusTM 8M Enclosure The C-BusTM Enclosures provide a housing for various C-Bus DIN-mounted devices. The 8M enclosure is specifically designed for distributed applications that require physical proximity between DIN units and keypads, sensors or controlled loads. Suitable for surface mounting, the 8M enclosure consists of a box with a cover and a DIN rail for mounting one 8M or two 4M units. The enclosure also has provisions for mounting neutral and ground bars.
C-BusTM Lighting Control + enclosures C-BusTM 12M Enclosure The C-BusTM Enclosures provide a housing for various C-Bus DIN-mounted devices. The 12M enclosure is specifically designed for distributed applications that require physical proximity between DIN units and keypads, sensors or controlled loads. Suitable for surface mounting, the 12M enclosure consists of a box with a cover and a DIN rail for mounting three 4M C-Bus units, one 8M unit plus one 4M unit or one 12M unit.
C-BusTM Lighting Control + enclosures C-BusTM 24M Enclosure The C-BusTM Enclosures provide a housing for various C-Bus DIN-mounted devices. The 24M enclosure is specifically designed for distributed applications that require physical proximity between DIN units and keypads, sensors or controlled loads. Suitable for surface mounting, the 24M enclosure consists of a box with a hinged door and two rows for mounting C-Bus DIN-mounted units.
C-BusTM Lighting Control + enclosures C-BusTM 36M Enclosures The C-BusTM Enclosures provide a multi-purpose means for housing various C-Bus DIN-mounted devices. Suitable for flush or surface mounting, the enclosure consists of a cabinet, a mounting pan assembly, and a cover assembly. The cabinet can be ordered separately, allowing for its installation with the rough-in of field wiring. The mounting pan comes with one L barrier, four horizontal barriers, and three DIN rails pre-installed.
C-BusTM Lighting Control + enclosures C-BusTM 36MS Enclosures The C-BusTM Enclosures provide a multi-purpose means for housing various C-Bus DIN-mounted devices. Suitable for flush or surface mounting, the enclosure consists of a mounting, pan assembly, and a cover assembly. The cabinet can be ordered separately, allowing for its installation with the rough-in of field wiring. Optional accessories are available to meet the needs of particular installations.
C-BusTM Lighting Control + enclosures C-BusTM 60M Enclosures The C-BusTM Enclosures provide a multi-purpose means for housing various C-Bus DIN-mounted devices. Suitable for flush or surface mounting, the enclosure consists of a cabinet, a mounting pan assembly, and a cover assembly. The cabinet can be ordered separately, allowing for its installation with the rough-in of field wiring. Options are available to meet the needs of particular installations.
C-BusTM Lighting Control + technical section NeoTM Keypad - Specifying Colors When Ordering Keypad Assemblies Order numbers for the Neo Keypad assemblies indicate the number of buttons desired on the keypad and the color of each customizable component (inner surround, outer surround, and button cover). Color numbers are taken from the “Neo Colors” table and must be given in the following order: outer surround, inner surround, and button covers.
C-BusTM Lighting Control + technical section Neo™ Keypads 3.0 in. 76 mm .63 in. 16 mm 4.57 in. 116 mm .24 in. 6 mm 2.64 in. 67 mm 2.05 in. 52 mm Front view of keypad, including external height Side view of keypad, including height and Bottom view of keypad, including measurements and width measurements of case depth requirements for insertion into wall for width of unit and depth case extends from wall SaturnTM Keypads 3.0 in. 76 mm 0.51 in. 13 mm 2.6 in. 66 mm 4.57 in. 116 mm 2.05 in.
+ C-BusTM Lighting Control technical section Saturn™ Keypads with Dynamic Labelling Technology™ 3.0 in. 76 mm .43 in. 10.8 mm 4.57 in. 116 mm 1.13 in. 28.8 mm Front and top-side views of the Saturn DLT keypad illustrate its length and width and the depth the case extends into and out of a wall Neo™ Style Decorator Keypads 0.63 in. 16 mm 3.0 in. 76 mm 1.69 in. 43 mm 2.76 in. 70 mm 4.57 in. 116 mm 0.28 in. 7 mm 2.99 in. .35 in.
C-BusTM Lighting Control + technical section Mark II Touch Screen 0.75 in. 19 mm 4.53 in. 115 mm 0.75 in. 19 mm 5.98 in. 152 mm Front view of Mark II Touch Screen Side view of Mark II Touch Screen Mark II Desktop Touch Screen 3.75 in. 95 mm 7.5 in. 191 mm Color Touch Screen 0.9 in. (23.5 mm) 2.2 in. (54 mm) 6.9 in. (173 mm) 6.9 in. 173 mm 9.8 in. 246 mm 2.9 in. (72.5 mm) 9.8 in.
C-BusTM Lighting Control + technical section Ethernet Network Interface 2.83 in. 72 mm 2.56 in. 65 mm 3.35 in. 85 mm View of the Ethernet Network Interface showing width View of the Ethernet Network Interface showing height and depth PC Interface 2.84 in. 72 mm 2.56 in. 65 mm 3.35 in. 85 mm Front view of the PC Interface showing width Side view of the PC Interface showing height and depth USB Interface 2.84 in. 72 mm 2.60 in. 66 mm 3.35 in.
C-BusTM Lighting Control + technical section Network Bridge 2.83 in. 72 mm 2.56 in. 65 mm 3.35 in. 85 mm Side view of Network Bridge showing height and depth Front view of the Network Bridge showing width Power Supply 2.83 in. 72 mm 2.56 in. 65 mm 3.35 in. 85 mm Side view of a Power Supply showing depth and height Front view of a Power Supply showing width Device Router/Device Power Supply 3.8in. in. 3.8 8.9in. in. 8.9 226 mm 226 mm 97mm mm 97 12.57 in. 12.57 in.
C-BusTM Lighting Control Pascal Automation Controller + technical section Telephone Interface Unit 5.77 in. 146.5 mm 2.83 in. 72 mm 5.71 in. 145 mm TELEPHONE INTERFACE Front view of Telephone Interface Unit Front view of the Pascal Automation Controller 1.18 in. 30 mm 2.48 in. 63 mm 3.62 in. 92 mm TELEPHONE INTERFACE Side view of the Pascal Automation Controller Side view of Telephone Interface Unit Bus Coupler General Input Unit 0.71 in. 0.71 in. 18 18 mm mm 5.7 in.
C-BusTM Lighting Control + technical section Four-Channel Auxiliary Input Unit 2.8 in. 72 mm 2.6 in. 65 mm 3.4 in. 85 mm Side view of Four-Channel Auxiliary Input Unit Top view of Four-Channel Auxiliary Input Unit Indoor PIR Occupancy Sensor 20 ft 6m 20 ft 6m 8 ft 2.4 m 3.9 in. 100 mm 28 ft 8.5 m 2.2 in. 57 mm 28 ft 8.5 m ft 28 ft 8.5 m 8.
C-BusTM Lighting Control Outdoor Motion Sensor + technical section 5.5 in. 140 mm 8 ft 2.4 m 5° 4.5 in. 114 mm 30° 2.9 in. 74 mm Field of view from top of Outdoor Motion Sensor Field of view from side of Outdoor Motion Sensor Side view of Outdoor Motion Sensor Light-Level Sensor 0.52 in. 13 mm 2.99 in. 76 mm 0.49 in. 12.5 mm 4.57 in. 116 mm 2.83 in. 72 mm Front view of Light-Level Sensor 1.93 in.
C-BusTM Lighting Control + technical section Professional Series Dimmer 7.5 in. 190 mm 8 in. 202 mm 9 in. 230 mm 7.7 in. 195 mm 3 in. 75 mm POWER NETWORK 0.4 in. 10 mm Front view including mounting centers Side view Top view Phase Angle Dimmer Unit 2.6 in. 65 mm 8.5 in. 215 mm 3.4 in. 85 mm Front view of the Phase Angle Dimmer Unit Side view of the Phase Angle Dimmer Unit 2 Channel DALI Gateway 2.83 2.83 in. in. 72 72 mmmm 2.6 in. 2.6mm in. 65 65 mm DALI 1 DALI 2 Unit/ Comms 3.4 in.
C-BusTM Lighting Control + technical section 4 Channel 0-10V Fluorescent Ballast Dimmer 2.83 in. 72 mm 2.56 in. 65 mm 3.35 in. 85 mm Front view of the 0-10V Fluorescent Ballast Dimmer Side view of the 0-10V Fluorescent Ballast Dimmer 10 Amp Relay Unit 5.67 in. 144 mm 2.56 in. 65 mm 3.35 in. 85 mm Front view of a C-Bus 4 Channel 10 Amp Relay without power supply Side view of a C-Bus 4 Channel 10 Amp Relay 20 Amp Relay Units 2.56 in. 65 mm 8.46 in. 215 mm 3.35 in.
+ C-BusTM Lighting Control Unit 1 2 3 4 technical section C-Bus Changeover Relay 3 Changeover Relay Units C-Bus CONNECTIONS 5.67 in. 144 mm N L Unit 1 2 3 4 C NC NO 2.60 in. 66 mm C NO NC 1 USE COPPER WIRE ONLY NC NO C NO NC 2 4 3.35 in. 85 mm C-Bus Changeover Relay 3 C-Bus CONNECTIONS NC NO 4 C NC NO C Front view of a C-Bus Changeover Relay Side view of a C-Bus Changeover Relay Low Voltage Relay 8 Channel 3.15 in. (80 mm) 8.66 in. (220 mm) 1.50 in.
C-BusTM Lighting Control 12M Enclosure + technical section 4.0 in. 102 mm 12.78 in. 325 mm 9.09 in. 231 mm Side view of 12M Enclosure box showing depth Front view of 12M Enclosure box showing height and width 24M Enclosure 4.0 in. 102 mm 14.50 in. 368 mm 14.94 in. 379 mm Side view of 24M Enclosure box showing depth Front view of 24M Enclosure box showing height and width 36M Enclosure 15.4 in. 392 mm 3.9 in.
C-BusTM Lighting Control + technical section 36MS Enclosure 3.81 in. (97 mm) 15.44 in. (392 mm) 14.24 in. (362 mm) 22.12 in. (562 mm) 20.93 in. (532mm) 36MS Knockouts Symbol Dimensions for the 36MS Enclosure Surface Mounted Dimensions for the 36MS Enclosure Flush Mounted Conduit Size Symbol A ½ E Conduit Size B ¾ F 2 C 1 G 2½ D 1¼ H 3 1½ 60M Enclosure 15.4 in. 392 mm 3.9 in. 99 mm B,C,D,E B,C,D,E C,D,E,F,G D,E,F,G A A,B C,D,E,F D,E,F,G Symbol B,C A,B 40.6 in.
108
C-Bus Multi-Room Audio, Remote Controls and IR Accessories TM 109
Introduction to C-BusTM Multi-Room Audio, Remote Controls and IR Accessories Extend the capabilities of a C-Bus system by incorporating award winning C-Bus multi-room audio. Multi-room audio augments a C-Bus lighting control system, providing high quality sound throughout a home or business. C-Bus multi-room audio readily integrates with other C-Bus controls, providing a single source for audio and lighting from a single keypad or touch screen.
C-BusTM multi-room + Multi-Room audio C-BusTM Matrix Switcher The C-BusTM Audio Matrix Switcher provides a revolutionary means for distributing audio throughout a home. This Matrix Switcher provides up to eight zones of audio output from four source inputs. Audio sources can be switched via the front panel or by any C-Bus input device such as touch screen keypads. The matrix switcher is ideally suited for multi-room audio and structured wiring systems.
C-BusTM multi-room + Multi-Room audio C-BusTM Multi-Room Amplifiers The C-BusTM Multi-Room Amplifiers provide efficient, high fidelity audio to individual rooms. Available in either desktop or remote mount versions, these amplifiers are specifically designed to operate on the C-Bus network as an extension of the lighting control system, without third party gateways or custom integration. This means the ability to control amplifiers with the same keypad or touch screen used to control lighting levels.
C-BusTM multi-room + Multi-Room audio C-BusTM Audio Distribution Unit The C-BusTM Audio Distribution Unit is an optional device that can be used in conjunction with the C-Bus Multi Room Audio System to further enhance C-Bus enabled audio product family. The C-Bus Audio Distribution Unit distributes a single digitized stereo audio input source to multiple locations via amplifiers wired in a parallel format.
C-BusTM multi-room + Multi-Room audio C-BusTM Audio Speakers The C-BusTM Audio Speakers are available as indoor or outdoor models and are designed to be used with home theater, multi-room, and outdoor audio applications that will accept 8 Ohm speakers, such as the Schneider Electric C-Bus Multi-Room Audio (MRA) system. The indoor speakers come in wall- or ceiling-mount versions that are installed with the front of the speaker flush with the mounting surface.
C-BusTM multi-room + Multi-Room audio C-BusTM Universal Remote The C-BusTM Universal Remote is a digital universal remote control that is easy to use, allowing control of electronic devices that are equipped with an infrared remote. The Schneider Electric C-Bus Universal Remote can control up to 16 devices, including C-Bus devices, DVDs, TVs, VCRs and satellite receivers. The remote is easily configured by using either automatic code detection or the learn option.
C-BusTM multi-room + Multi-Room audio C-BusTM Four & Eight Button Remote Controllers The C-BusTM Four- and Eight- Button Infrared (IR) Remote Controllers provide hand held remote control operation of lighting and other loads. Designed to work in conjunction with C-Bus devices containing IR receivers, these convenient remote controls can switch, dim and control lighting scenes. C-Bus Four- and Eight- Button Remote Controllers control multiple input units as well as separately configured units.
C-BusTM multi-room + Multi-Room audio IR Accessories IR TUBE TARGET Infra-red IR target designed to receive IR commands from Infra-red remote controls. Simple in-ceiling mounting. Includes phoenix connector and 2 meters of wire. Comes with optional clear lens. IR Shelf Mount Target Infra-red IR target designed to receive IR commands from Infra-red remote controls. Simply set unit on shelf for easy IR command access. Includes phoenix connector and 2 meters of wire.
C-bus® multi-room + technical section Matrix Switcher 0.33 in. 8.3 mm 16.7 in. 424 mm 2.6 in. 66 mm 11 in. 280 mm 13.6 in. 346 mm Top View 0.3 in. 8 mm Bottom View Multi-Room Amplifiers 11 in. 280 mm Desktop Model Audio Amplifier 2.6 in. 66 mm 7.6 in. 194 mm 4.1 in. 105 mm .31 in. 8 mm 7.09 in. 180 mm Top View Front View 1.1 in. 28 mm Remote Model Audio Amplifier 2.44 in. 62 mm 1.1 in. 28 mm 4.13 in. 105 mm 6.89 in. 175 mm Top View 0.31 in. 8 mm .11 in. 2.
+ C-Bus® multi-room technical section 6.52 in. (165.5 mm) Audio Distribution Unit(50 1.97 in. mm) 5.61 in. 5.61 in. (142.5 mm) 142.5 mm 6.52 in. 6.52 in. (165.5 mm) 165.5 mm 1.20 in. 1.20 30.5 mmin. (30.5 mm) 1.97 in. 1.97 in. 50 mm (50 mm) Bottom 5.61 in. (142.5 mm) Top View 1.20 in. (30.5 mm) Audio Speakers 3.125 in. 79.38 mm 9.45 in. 240 mm 8.7 in. 221 mm 8.7 in. 221 mm Ceiling Mount Speaker Dimensions 12.125 in. 308 mm 12.125 in. 308 mm 3.125 in. 79 mm 6.75 in. 171 mm 6.0 in.
C-bus® multi-room + technical section C-BusTM Universal Remote 2.4 in. 61 mm 8.3 in. 210 mm 2.1 in 52 mm 5.9 in 149 mm 2.1 in 52 mm 5.9 in 149 mm C-BusTM Four & Eight Button Remote Controllers 1 in mm 1 in 25 mm 2.2 in. 2.2 in 55 mm 2.1 in. 2.1 in 52 mm 52 mm 1.3 in. 1.3 in 32 mm 32 mm 55 mm 2.1 in 52 mm 2.1 in. 2.1 in 52 mm mm 52 4.3 in. 4.3 in 108 mm 108 mm 5.9 in. 5.9 in 149 mm 149 mm 5.9 in. 5.9 in 149 mm 149 mm 5.
C-Bus HVAC Controls TM 121
Introduction to C-BusTM HVAC Controls C-BusTM thermostats are used to regulate the air temperature of zones by controlling heatingventilation-air conditioning (HVAC) equipment. With C-Bus thermostats, you have the flexibility of any keypad becoming a comfort control point. C-Bus thermostats may operate as stand alone devices, or be controlled via other C-Bus devices such as wall switches or touch screens.
C-BusTM Control + HVAC C-BusTM Basic Single Zone Thermostats The C-Bus™ wall mounted, Single Zone Thermostats include support for control of HVAC units via C-Bus or the internal HVAC relays. They also allow the user to manually set the temperature and mode of operation (heating, cooling or ventilation). The easy to use operator interface includes fan speed control, set back or economy mode and an integral LCD to display the current temperature and mode of operation.
C-BusTM Control + technical section C-BusTM Basic Single Zone Thermostats 3.62 in. 92 mm 5.0 in. 127 mm 1.06 in. 27 mm C-BusTM Programmable 4 Zone Thermostats 4.13 in. 105 mm 5.9 in. 150 mm 1.26 in.
C-Bus RF Wireless Controls TM 125
Introduction to C-BusTM RF Wireless Controls Break loose from the cumbersome wiring and associated cost of home control systems with C-Bus™ RF wireless communication. Designed to easily replace standard wall switches, C-Bus RF offers seamless dimming and scene control technology with the elegant aesthetic of Neo™ and Saturn™ decoratorstyle keypads. C-Bus RF Wireless Wall Units include Switches, leading–edge Dimmers and Scene Controllers. The units are designed to replace standard wall switches and dimmers.
C-BusTM wireless controls + wireless controls C-BusTM RF Wireless Controls 600W RF Dimmers C-BusTM RF Wireless dimmers operate all common lighting loads and work in conjunction with other C-Bus wired and wireless controls to provide full dimming control. These decorator style, leading edge dimmers are available in both the NeoTM and SaturnTM styles with either 2 or 4 button configuration.
C-BusTM wireless controls + wireless controls C-BusTM RF Wireless Controls 1000W RF Dimmers C-BusTM RF Wireless dimmers operate all common lighting loads and work in conjunction with other C-Bus wired and wireless controls to provide full dimming control. These decorator style, leading edge dimmers are available in both the NeoTM and SaturnTM styles with either 2 or 4 button configuration.
C-BusTM wireless controls + wireless controls C-BusTM RF Wireless Controls RF Switch and Scene Controllers The C-Bus NeoTM and SaturnTM RF Switches and Scene Controllers are part of the C-Bus wireless wall unit family. The switches are a two-wire retrofit range using the switching leg (line and load). Switches are available in 2 and 4 button models, and come in a decorator style. Scene Controllers can be used for 3-way switching, 4-way switching, or scene control.
C-BusTM wireless controls + wireless controls C-BusTM RF Wireless Controls Plug Adaptors C-BusTM RF Plug Adaptors allow the control of appliances and/or lamps using C-Bus RF Wireless Keypads. Plug adaptors come in two different models, a standard switch unit (8A) or 600W dimmer unit. Both models are programed easily using Learn Mode, or by using the C-Bus Toolkit Software.
C-BusTM wireless controls + wireless controls C-BusTM RF Wireless Controls RF Remote Control The C-BusTM Wireless RF Remote Control provides control of C-Bus Wireless RF Control Systems keypads and/or plug adapter units. Up to ten separate keypad or plug adapter unit buttons can be controlled by the remote control. The buttons can be on various units on different wireless networks. A single button on a keypad or plug adapter unit can be controlled by up to two RF remote controls.
C-BusTM wireless controls + wireless controls C-BusTM RF Wireless Controls Wireless Gateway The C-BusTM RF Gateway provides a C-Bus protocol communication bridge between a single C-Bus RF wireless system and a single C-Bus wired network. Both the wired and wireless C-Bus network types use the same protocol commands, thus by using the Gateway, a C-Bus RF wireless and wired network can communicate and seamlessly interact with each other.
C-BusTM wireless controls + technical section C-BusTM Neo™ Decorator Style RF Keypads 0.91 in. 23mm 3.0 in. 76 mm 1.69 in. 43 mm 2.76 in. 70 mm 4.57 in. 116 mm 0.28 in. 7 mm 2.99 in. .35 in. 9 mm 76 mm Front view of keypad, including external height and width measurements of Faceplate Top view of keypad, including Side view of keypad, including height and depth requirements for insertion into wall depth of face plate C-BusTM SaturnTM Decorator Style RF Dimmers 4.57 in. 116 mm .35 in. .
C-BusTM wireless controls + technical section C-BusTM RF Wireless Controls RF Remote Control Dimensions for the RF Remote Holder Dimensions for the RF Remote Control 2.2 in. 55 mm 5.9 in. 149 mm 4.3 in. 108 mm 1.3 in. 33 mm 2.0 in. 52 mm 1.3 in. 33 mm C-BusTM RF Wireless Controls Wireless Gateway 4.10 in. 105 mm 5.9 in. 149 mm Front view of Gateway Side view of Gateway 1.0 in.
C-Bus TM 135 Software
Introduction to C-BusTM Software Residential Control: The C-BusTM HomeGate Software provides residential application PC control of a C-Bus Control System. HomeGate can be accessed from a local PC or remotely via an Internet connection with a standard web browser. The HomeGate graphical user interface is designed for simplicity of use and provides easy to use Menu and Tab based options. The interface allows set-up of multiple user pages and provides a way to easily navigate between the pages.
c-busTM software + software C-BusTM Software HomeGate The C-BusTM HomeGate Software provides residential application PC control of a C-Bus Control System. HomeGate can be accessed from a local PC or remotely via an Internet connection with a standard web browser. The HomeGate graphical user interface is designed for simplicity of use and provides easy to use Menu and Tab based options. The interface allows set-up of multiple user pages and provides a way to easily navigate between the pages.
c-busTM software + software C-BusTM Software Schedule Plus The C-BusTM Schedule Plus Software provides a powerful and simple to use interface to a C-Bus control system. Schedule Plus provides control and monitoring of a commercial or industrial C-Bus system from a PC running the Microsoft® Windows® operating system. Access is obtained from a local PC or remotely via an Internet connection with a standard Web Browser.
Design guide 139
Design guide contents Introduction Capabilities Specifications a. Overview a. Dimming b. Multi-scene control c. Daylighting control d. C-Bus with Powerlink a. Programming principles b. Addressing conventions i. Group addressing ii. Area addressing iii. Application addressing iv. Network addressing c. C-Bus wiring i. Network topology ii. Network size iii. Network cable iv. Power supplies v. Network burden vi. System clock vii.
C-BusTM Lighting Control + design guide Contents I. Introduction a. Overview II. Capabilities a. Dimming b. Multi-Scene Control c. Daylighting Control d. C-Bus with Powerlink III. Specifications a. Programming Principles b. Addressing Conventions i. Group Addressing ii. Area Addressing iii. Application Addressing iv. Network Addressing c. C-Bus Wiring i. Network Topology ii. Network Size iii. Network Cable iv. Power Supplies v. Network Burden vi. System Clock vii.
C-BusTM Lighting Control + design guide Introduction Lighting Control from Schneider Electric employs C-Bus™ network control for commercial lighting. Compared to conventional control systems, C-Bus network controls reduce installation time, simplify lighting control circuits, save energy and achieve greater functionality. The C-Bus network is a distributed intelligence network control system, incorporating microprocessor-based control.
C-BusTM Lighting Control + design guide Illustration of Phase Angle Control in Conference Room Multi-Scene Control The press of one button may control many individual loads. Loads may be turned on, off, or dimmed to a predetermined level. Depending on how a space is used, it may be necessary to have certain lights set to various levels for different functions.
C-BusTM Lighting Control Daylighting Control Daylighting control may be used to reduce artificial lighting of interior spaces when those spaces receive adequate natural light from windows or skylights. Daylighting controls are commonly installed in California, where the state’s building code, Title 24, requires the use of daylighting controls in daylit spaces. Daylighting control may be used to save energy in schools, offices, warehouses, and even retail spaces.
C-BusTM Lighting Control + design guide Specifications Programming Principles All C-BusTM devices require programming, with the exception of power supplies. Programming is achieved with proprietary software using a PC.
C-BusTM Lighting Control + design guide Area Addressing The area address is a convenient method of addressing multiple output channels collectively. Large areas consisting of many C-BusTM output units may be controlled from a single point on the C-Bus network. The area address is used in the group address field to achieve control. Illustration of Area Addressing Each C-Bus input and output device in a control area must be assigned the same area address.
C-BusTM Lighting Control + design guide Application Addressing Applications are used to divide the C-Bus network into independent functional systems. All group addresses in any unit are associated with that unit’s applications, and commands issued by a C-Bus input device will affect only output devices with matching applications and group addresses. Up to 255 application addresses may be used on a single C-Bus network.
C-BusTM Lighting Control + design guide Network Addressing The network address is used to identify networks in a multi-network system. Each C-BusTM network may be connected to other C-Bus networks using a C-Bus Network Bridge. The C-Bus Network Bridge facilitates communications across networks, allowing device on one C-Bus network to issue commands to devices on another C-Bus network.
C-BusTM Lighting Control + design guide C-BusTM Wiring Rules Schneider Electric C-Bus incorporates a distributed intelligence lighting control system that employs a low voltage network of intelligent input, output and network communication units to control line rated loads. C-Bus network communications is achieved using proprietary C-Bus protocol over an unshielded twisted pair LAN cable (Cat-5 UTP).
C-BusTM Lighting Control + design guide Planning & Design The most important phase of any Schneider Electric C-BusTM lighting control project is the planning and design phase. A complete plan starts with a good understanding of the lighting control requirements. To determine what is required, start by asking the right questions. 1. Where is lighting control required? For example, a school may have both exterior and interior lighting that requires control.
C-BusTM Lighting Control + design guide Design Project Office & Conference Room Design Project Space Lighting Offices 1-4 Tandem-Wired 3-Lamp Luminaires Neutral Line Offices 1-4: Tandem wired 3-lamp fluorescent luminaires (32W T8) Lighting power density of 192W/225SF= .
C-BusTM Lighting Control + design guide Conf Room: (2) C-BusTM PIR 360° occupancy sensors (1) DLTTMh NeoTM keypad (4) 4A Phase angle dimmer outputs (1 per group) C-Bus Input Unit Placement Offices 1-4: - Place keypad in wall box adjacent to entry - Place occupancy sensor in ceiling over desk for best coverage Conf Room: - Place DLT keypad in wall box adjacent to entry - Place (2) occupancy sensors over table for best coverage Packaging of Output Units Offices 1-4: In total, offices require (2) 4-Ch
C-BusTM Lighting Control + design guide Conf. Room: In total, requires (1) 4-Ch Phase Angle Dimmer unit and (1) 4-Ch 20A relay unit. Custom packaged Area Lighting Panel in 24M enclosure.
C-BusTM Lighting Control + design guide Finished Design Completed Project Layout Office 1 - A Table Front Office 1 - B Office 2 - A Office 2 - B Table Rear Office 3 - A Office 3 - B Room Front Office 4 - A Office 4 - B Room Rear Illustration of Design Project Controls Installation Once the design phase is complete, installation may begin. Several simple steps are typically followed to achieve a fast and accurate installation of the C-BusTM network control system. 1.
C-BusTM Lighting Control + design guide One-line Diagram Schneider Electric occupancy sensors, Powerlink® and C-Bus™ control systems can be used independently or combined to provide the optimal lighting control solution.
C-BusTM Lighting Control + design guide Schneider Electric Occupancy Sensors Occupancy sensors from Schneider Electric are the perfect solution for applications needing simple occupancy-based controls. Low-voltage ceiling- and wall-mounted occupancy sensors can be tied into C-Bus network using simple dry contact input.
C-BusTM Lighting Control + design guide One-line Diagram C-Bus™ home control solutions provide the utmost in capabilities, lower commissioning cost and greater customer appeal.
C-BusTM Lighting Control Sensors (PIR/IR/Light Level) C-Bus Remote Control design guide C-Bus Network Typical Cat-5 Cable (Any Topology) Input Units + Neo Decorator Keypad Neo™ Keypad Saturn™ Decorator Keypad Saturn Keypad Saturn DLT Keypad Neo DLT Keypad Bus Coupler (Dry Contact Connections) RS-232 and Ethernet Connections Telephone* Security, Blind/Shade Control, etc.
320 Tech Park Drive, Suite 100 LaVergne, TN 37086 Tel: 1-888-SQUARED www.schneider-electric.us Document Number 1200CT0701R09/09 C-Bus, Saturn and Neo are registered trademarks of Schneider Electric and/or its affiliates in the United States and/or other countries. Other trademarks used herein are property of their respective owners. 09-09 mq ©2009 Schneider Electric. All rights reserved.
1200CT0902R01/10 01/2010 Addendum Products Guide - Lighting Control and Integrated Home Systems ABOUT THIS ADDENDUM This bulletin appends selection and technical information and catalog numbers appearing in 1200CT0701R09/09 "Products Guide – Lighting Control and Integrated Home Systems". REVISIONS BY PAGE NUMBER The information below references corresponding page number in the Products Guide.
Products Guide - Lighting Control and Integrated Home Systems Instruction Bulletin Page 14: Wall Mount Occupancy Sensor – Passive Infrared (PIR) Catalog Number Color SLSWPS1500 White Page 25: Enclosure Cabinet Dimensions – Track Limiting Panels Enclosure Cabinet Dimensions (H x W x D) 12M 9 x 14.25 x 3.75 in. (229 x 362 x 95mm) 21M 17.92 x 14.25 x 3.75 in. (455 x 362 x 95mm) 42M 33.78 x 14.25 x 3.75 in.
