Technical information

Technical Information
Supply Voltage 27Vdc (powered by Amplier via digital audio connection), or
24Vdc @ 500 mA (via external power pack)
Analog Input 2.8 V p-p maximum (31 k Ω)
Signal Level (audio inputs)
Harmonic Distortion ≤ 0.05%
Frequency Response 100 Hz to 20 kHz
Dimensions (WxHxD) 6.52 in. x 1.97 in. x 1.2 in. (165.5mm x 50mm x 30mm)
IR Port Yes
A/D Conversion 16 bit PCM
Operating Temperature 50-104
O
F (10-40
O
C)
Operating Humidity 90% RH (non-condensing)
Standard UL Listed 60065 Audio, Video and Similar
Electronic Apparatus - Safety Requirements
*For Diagram see technical section page 116
Catalog Number Description
SLC560011 Audio Distribution Unit
SLC5600P24500S Amp External Power Supply (only needed if Audio distribution unit is used to provide an additional digital input for the Matrix Switcher)
C-BUS
TM
MULTI-ROOM
+
MULTI-ROOM AUDIO
The C-Bus
TM
Audio Distribution Unit is an optional device that can be used in
conjunction with the C-Bus Multi Room Audio System to further enhance C-Bus enabled
audio product family.
The C-Bus Audio Distribution Unit distributes a single digitized stereo audio input source
to multiple locations via ampliers wired in a parallel format. Functions such as Volume,
Bass, Treble and Balance can be adjusted from a C-Bus input device at any of the audio
output locations.
The C-Bus Audio Distribution Unit converts a single analog stereo audio input to a digital
audio output. That output can then be connected to the Matrix Switcher as an additional
input or to the C-Bus Desktop or Remote Amplier as a stand-alone conguration.
Product Features
• Distributes a single stereo audio source to
C-Bus Audio Ampliers via a digitized signal
over Cat-5 cable
• Does not require any C-Bus programming
(hardware only)
• One stereo analog audio source input (2
X RCA)
• One digital audio output
• Output can be looped between C-Bus
Audio Ampliers
• IR emitter port
Audio Distribution Unit
C-Bus
TM
Audio Distribution Unit
113