Technical information

C-BUS
TM
LIGHTING CONTROL
+
DESIGN GUIDE
Multi-Scene Control
Presentation (scene 1)
Room Front = Off
Room Rear = 50%
Table Front = 50%
Table Rear = 50%
Meeting (scene 2)
Room Front = 0%
Room Rear = 50%
Table Front = 100%
Table Rear = 100%
Up to (8) scenes with
8-button keypad or DLT
Multi-Scene Control
The press of one button may control many individual loads. Loads may be turned on, off, or dimmed to a predetermined level. Depending on
how a space is used, it may be necessary to have certain lights set to various levels for different functions. For example, a conference room
may have multiple groups of lighting where one group illuminates the table, another group illuminates the perimeter in the back of the room
and another group illuminates the perimeter in the front of the room. During a meeting, it may be desirable to have the lighting over the table
set to 100% and have the lighting around the perimeter set to 50%. This could be accomplished with a single button press to create the
“meeting” scene. For presentations, perimeter lighting in the front of the room may be turned off, lighting over the table set at 50%, and
perimeter lighting in the back of the room set at 50%.
Illustration of Phase Angle
Control in Conference Room
143