Technical information

Technical Information
Current Consumption @ 24Vdc
1
34mA Nominal (125mA maximum)
Supply Voltage 24Vdc
Isolated Relay 1A @ 24Vdc Resistive
Operating Temperature 32 - 122° F (0 - 50°C)
Max. Humidity 90% RH Non-condensing
Standards UL and cUL Listed FCC Part 15
Home and Ofce Use (Class B) Title 24 Certied
*For Diagram see technical section page 21
Catalog Number Description
SLSWPS1500 Wall Mounted Occupancy Sensor PIR
SLSPP1277 Power Pack (required)
SLSSP24 Auxiliary Relay
Wiring Color Table
Wire Color Functions
Black 0Vdc
Red +24Vdc
Green Isolated Contact (N.C.)
Yellow Isolated Contact Common
Orange Isolated Contact (N.O.)
Blue Control Output
*For Diagram see technical section page 21
*Control power must be provided by Schneider Electric Power Pack SLSPP1277 or approved equivalent. Confirm the
sensor is connected to the Class 2 side of the Power Pack. Refer to the Schneider Electric Power Pack SLSPP1277
Instruction Bulletin for additional information
C-BUS
TM
OCCUPANCY SENSORS
+
WALL MOUNTED OCCUPANCY SENSORS
Schneider Electric Wall Mounted Passive Infrared (PIR) Occupancy Sensor accurately
detects occupancy and automatically switches lighting on and off as needed. This
sensor is wall or ceiling mounted for superior motion detection.
The PIR Occupancy Sensor includes 3 interchangeable lenses for custom coverage
patterns. The Wide Angle lens has a 2500 square foot coverage area when the sensor is
mounted 8 feet high, the Long Range lens has a 102 linear foot coverage area @ 10 ft.
high and the High Bay lens has a 54 linear foot coverage area @ 30 ft. high. With a 110
degree eld of view the Schneider Electric Wall Mounted PIR Occupancy Sensor is ideal
for warehouse, business and ofce settings.
Wall mount sensors also incorporate an integral light level sensor to prevent lighting from
switching On when sufcient ambient light is present, such as is commonly found in
windowed areas.
Installation and conguration is simple. The sensor readily mounts to walls as well as
drop ceilings and features front located adjustments for setting sensitivity and time delay.
Features an isolated relay for use with building automation, security and HVAC systems.
Product Features
• Interchangeable lenses for
custom coverage pattern
• Wide Angle - 2500 sq. ft. @ 8 ft.
mounting height
• Long Range - 102 linear ft. @ 10
ft. mounting height
• High Bay - 54 linear ft. @ 30 ft.
mounting height
• 110 degree eld of view
• Light Level Sensing (from 0.5 to
250 foot-candles)
• Adjustable Time Delay
(pre-set time delays from 15
seconds to 30 minutes)
• Adjustable Sensitivity (from 60 to
100%)
• Isolated Relay
• Red LED Motion Indicator
• Front located adjustment access
cover
• UL
®
/cUL Listed
Wall Mounted Occupancy
Sensor PIR
Wall Mounted Occupancy Sensor
PIR
14