Technical information
Catalog Number Description
NFSELG3 Slave address selector
NF2HG3 Slave bus connect harness
NFCW3G Column width controller cable
NFADAPTERG3 Remote mounting adaptor
NFFPC3G Controller front panel serial cable
NFASBKG3 Custom barrier kit
6382G3MODEM Modem kit
6382RS485G3KIT RS-485 converter kit
Subnet Cable
NFSN06 6’ (1.83 m) sub-net cable
NFSN10 10’ (3.05 m) sub-net cable
NFSN25 25’ (7.62 m) sub-net cable
NFSN50 50’ (15.24 m) sub-net cable
POWERLINK
®
LIGHTING CONTROL
+
ACCESSORIES
Slave Address Selector
The Slave Address Selector is required for each slave panel connected to a subnet. The slave address selector
establishes a unique system address for the panel that is both essential for system operation and useful when the
system is accessed from a remote location. The slave address selector plugs directly onto control buses.
• Rotary operated switch labeled 0–7 for addressing panels
• Removable terminal block for connecting subnet cable
• Modular plug for connecting the Slave Address Selector to smart bus using the Slave Bus Connect Harness
Slave Bus Connect Harness Assembly
The Slave Bus Connect Harness assemblies are required in slave panels furnished with two control buses.
The harness contains modular plugs on each end.
Column-width Controller Cable
A Column-width Controller Cable is required to connect the power supply to the controller when used in an
NF Column-width Panelboard.
Remote Mounting Adapter
The Remote Mounting Adapter provides a means for mounting a Powerlink controller and power supply in a
separate enclosure. This bracket is ideal for retrot applications where all 42 circuit spaces in the panelboard are
required for branch circuit breakers.
Controller Front Panel Serial Cable
The Controller Front Panel Serial Cable is used to make direct RS-232 connections from the controller to a PC or
laptop computer.
Custom Barrier Kit
The custom barrier kit provides a heavy-duty barrier for separating class II control circuits from power wiring.
Modem Kit
This kit, which is designed specically for Schneider Electric Powerlink G3 controllers, contains all the necessary
components for use with the controller.
RS-485/RS-232 Converter Kit
The RS-485/RS-232 converter kit allows connection from the RS-485 port of the controller to the serial port of a
personal computer.
Subnet Cable
Four wire cable for connecting panels together in a subnet conguration
Accessories
38