Technical information

Technical Information
Input 120 or 277Vac 60 Hz
Output 120Vac 277Vac
1000 W max. incandescent load
1000 VA max. ballast load 1800 VA max. ballast load
¼ hp max. motor load
Operating Temperature 32 - 122° F (0 - 50°C)
Humidity 90% max. relative humidity non-condensing
Standard UL and cUL Listed FCC Part 15
Home and Ofce Use (Class B) Title 24 Certied
*For Diagram see technical section page 19
Catalog Number Description
SLSPWS1277AI Wall Switch Occupancy Sensor (ivory)
SLSPWS1277AW Wall Switch Occupancy Sensor (white)
OCCUPANCY SENSORS
+
WALL SWITCH OCCUPANCY SENSORS
Schneider Electric Wall Switch Occupancy Sensors employ the latest passive infrared
(PIR) technology to automatically control lighting in ofces, private restrooms and
employee break rooms.
Each Sensor employs a special 180° multi-segmented lens and PIR motion detector
circuit to detect motion. This unit will automatically switch the lights off after a preset
delay if no motion is detected.
Schneider Electric Wall Switch Occupancy Sensor ts in place of existing wall switches,
connecting to existing active line and ground wiring similar to a typical wall switch. No
neutral or minimum load is required.
To assure long relay life, Schneider Electric has developed a low energy switch circuit
to assure maximum contact life. These sensors are compatible with electronic and
magnetic ballast loads, and require no minimum load.
Product Features
• Available in white and ivory with
matching decorator wall plate
cover
• Auto On / Auto Off
• Manual bypass
• 120 or 277Vac input (no neutral
required)
• No power pack required
• No minimum load
• 180° eld of view (Up to 1000
sq. ft.)
• User adjustable time delay from
15 sec - 30 minutes
• Red LED motion indicator blinks
to indicate motion detection
• Suitable for use on all electronic
and magnetic ballasts
• Furnished with (3) x 6 inch
external wires (pig tails)
• UL and cUL Listed
• Five-year warranty
Wall Switch
Occupancy Sensor
Wall Switch
Occupancy Sensor
3