Technical information

Technical Information
Nominal Voltage Requirements 15-36Vdc @ 18 mA, drawn from the C-Bus network
Field of View 90°
PIR Detection Field Typically 400 sq ft (37 sq m)
Light-Level inhibit Threshold 0.1 footcandle (1 lux) to full sunlight
Timer Delay Range 0 sec-18 hr, 1 sec interval
Number of Units Use the C-Bus Calculator, a software utility, to
per Network determine the total network current load
C-Bus Connection Screw-type terminals, input terminals accommodate
24-16 AWG cable (0.2-1.31 mm
2
)
Status Indicators LED can be congured to turn on when movement is detected
Dimensions 3.9 in. (W) x 2.2 in. (H) [100 mm (W) x 57 mm (H)]
Weight 4.4 oz (125 g)
Mounting Surface: Ceiling or wall
Ht: 8 ft (2.4 m) above oor
Operating Environment Indoor 32°F to 122°F (0°C to 50°C)
Standards UL: Listed 916 Energy Management Equipment
CSA 22.2 Spec 205 Signal Equipment
FCC: Part 15.101, Class B Digital Device
EN61000-4-2 Immunity to ESD
*For Diagram see technical section page 101
Catalog Number Description
SLC5751L 90° Indoor PIR Occupancy Sensor
C-BUS
TM
LIGHTING CONTROL
+
SENSORS
Product Features
• Indoor use, wall or ceiling-mounted unit with
a 90° eld of view and a detection area of 400
square feet
• LED can be congured to indicate motion
detection
• Light-level sensor has Sunrise/Sunset settings,
clock overrides, and adjustable sensitivity
ranging from 0.1 foot candle to full sunlight
• Advanced circuitry to help prevent false
triggering, including electrostatic and
electromagnetic shields, dual element
detectors, pyroelectric ceramic sensors, and
an optical band pass lter
• Controls up to four C-Bus group addresses
that can be individually scheduled
• Non-volatile memory stores operating status
for recovery from a power outage
• Receives data and power over a network, so
the sensor does not require power packs or
line voltage connections
Distributed Intelligence
• Compatible with all C-Bus devices and the
Powerlink
®
NF3000G3C controller
• Easily congured by using Learn Mode or the
C-Bus Toolkit Software
Indoor PIR Occupancy Sensor
The C-Bus
TM
Indoor PIR Occupancy Sensor provides reliable thermal-radiation-based
control of lighting and other C-Bus output devices.
Suitable for wall or ceiling mounting, this sensor offers a continuous detection eld of
400 square feet and a 90° eld of view. The entire detection eld has uniform sensitivity
and no dead zones, making it an ideal lighting-control solution for ofces, corridors, and
conference rooms.
Conguration options include an adjustable light-level sensor that can be set to
automatically turn off lights when ambient light levels are sufcient or turn on lights when
ambient light levels are insufcient.
C-Bus
TM
Indoor PIR Occupancy Sensor
70