Technical information

Technical Information
Nominal Voltage Requirements 15–36Vdc @ 18 mA, drawn from the C-Bus network
Field of View 180°
Light-Level Range Reads: 2-278 footcandles (20-3000 lux)
Controls: 5-148 footcandles (40-1600 lux)
C-Bus Connection Screw-type input terminals accommodate 6 x 24 AWG cable (6 x 0.2 mm²)
Connection requires CAT 5 data cable
Max. Units/Network Based on the total network current load and available power
Conduit Openings Sized for 20 mm and 25 mm conduit ttings
Dimensions 4 in. (L) x 4 in. (W) x 2.5 in. (D) [102 mm (L) x 102 mm (W) x 65 mm (D)]
Weight 10.8 oz (305 g)
Mounting Indoor or outdoor, wall or ceiling
Indoor Height: At least 6.5 ft (1.9 m) above oor
Operating Environment Outdoor or indoor –22°F to 122°F (–30°C to 50°C)
RH: 95%, noncondensing
Standards FCC: Part 15.101, Class B Digital Device
*For Diagram see technical section page 102
Catalog Number Description
SLC5031PEWP Outdoor Light-Level Sensor
C-BUS
TM
LIGHTING CONTROL
+
SENSORS
The C-Bus
TM
light-level sensor measures ambient light levels and automatically issues
ON/OFF or ramp commands over a C-Bus network to maintain outdoor lighting levels.
Primarily designed for outdoor use, this light-level sensor is also suitable for indoor
settings in which a water resistant casing is desirable.
Product Features
• Outdoor use, wall- and ceiling-mounted
low-prole unit
• Can maintain a constant illumination level
of 5-150 footcandles
• Control of up to two C-Bus group addresses
• Sensors receive data and power over a single
C-Bus twisted-pair cable, so they do
not require power packs or line-voltage
connections
• 180° eld of view
Outdoor Light Level Sensor
C-Bus
TM
Outdoor Light-Level Sensor
75