Technical information
Technical Information
Power Requirements C-Bus: 15–36Vdc @ 22 mA required for normal operation.
Power: 120V or 277Vac connection, 10 W
Number of Units Use the C-Bus Calculator, a software utility, to
per Network determine the total network current load
Electrical Isolation 3.5 kV RMS from C-Bus to the line
Output Voltage Range 0-10Vdc (±0.5)
Output Rating Sourcing: 2.5 mA (minimum of 4 kohm)
Sinking: 15 mA at V
out
= 0V
8 mA at V
out
= 10V
[i.e., I = 15-(0.7 x V
out
)mA]
Status Indicators Unit: Unit power
C-Bus: Network voltage level and presence of system clock
C-Bus Connection (2) RJ-45 terminals
Cable (1) 15.75 in. (400 mm) CAT 5 patch lead with pre-terminated RJ-45 connectors
Output Terminals Accommodates 2 X 16 AWG or 1 X 12 AWG cable (2 x 1.3 mm
2
or 1 x 3.3 mm
2
)
Mounting DIN rail, 4M wide
Dimensions 3.35 in. (L) x 2.83 in. (W) x 2.56 in. (D) [85 mm (L) x 72 mm (W) x 65 mm (D)]
Weight 8.64 oz (245 g)
Operating Environment 32°F to 122°F (0°C to 50°C) RH: 95%, noncondensing
Standards UL: Listed 916 Energy Management Equipment
CSA 22.2 Spec 205 Signal Equipment
FCC: Part 15.101, Class B Digital Device
EN61000-4-2 Immunity to ESD
*For Diagram see technical section page 104
Catalog Number Description
SLCLE5504TAMP Analog Output Unit, 0-10V, 120V
SLCLE5504HAMP Analog Output Unit, 0-10V, 277V
C-BUS
TM
LIGHTING CONTROL
+
OUTPUT UNITS
The C-Bus
TM
4 Channel 0-10V Fluorescent Ballast Dimmer provides four channels of
analog 0-10Vdc that can be used as the control signals for various peripheral devices,
including electronically dimmable uorescent lighting ballasts.
This analog output unit can sink or source current as appropriate for the connected load,
and produces 0-10 V in response to commands from the C-Bus network.
Each channel can be individually adjusted from 0 to 100% at the unit, by C-Bus
commands or remotely, and each can drive multiple loads.
Product Features
• Produces four independently controllable
channels of 0-10Vdc for controlling dimmable
lighting ballasts or other loads
• Each channel can sink or source current and
drive multiple loads
• Two RJ-45 connectors facilitate quick
connections to the C-Bus network and
between similar units
• Unit and C-Bus LEDs show the status of the
unit and the network
• Non-volatile memory stores operating status
for recovery from a power outage
• 120 or 277Vac models available
Distributed Intelligence
• Compatible with all C-Bus devices and the
Powerlink
®
NF3000G3C controller
• Easily congured by using Learn Mode or the
C-Bus Toolkit Software
4 channel 0-10V Fluorescent Ballast Dimmer
C-Bus
TM
4 Channel 0-10V Fluorescent Ballast Dimmer
79