Technical information

Catalog Number Description
SLC5504TRVF 4 Channel, 120V, 10A w/power supply
SLC5504TRVFP 4 Channel, 120V, 10A w/o power supply
SLC5504HRVF 4 Channel, 277V, 10A w/ power supply
SLC5504HRVFP 4 Channel, 277V, 10A w/o power supply
SLC5512TRVF 12 Channel, 120V, 10A w/power supply
SLC5512TRVFP 12 Channel, 120V, 10A w/o power supply
SLC5512HRVF 12 Channel, 277V, 10A w/power supply
SLC5512HRVFP 12 Channel, 277V, 10A w/o power supply
Technical Information
Nominal Supply Voltage 110-120V (SLC5504TRVF, SLC5504TRVFP, SLC5512TRVF and SLC5512TRVFP)
277V (SLC5504HRVF, SLC5504HRVFP, SLC5512HRVF and SLC5512HRVFP)
Frequency Range(s) 50 - 60Hz
C-Bus C-Bus 15–36Vdc @ 18 mA required for programming
Supply Voltage when electrical power source is not connected
Sources 200 mA to the C-Bus Network
with electrical power source connected (non-power supply versions)
15–36Vdc @ 0 mA is required for programming
when electrical power source is connected
Electrical isolation 3.75 kV RMS from C-Bus to power source
Contact Type Voltage Free, magnetically latched
C-Bus Connections 2 RJ-45 connectors, CAT 5 UTP cable req.
Electrical Terminals Accommodates (1) #12 or up to (2) #14 - 16 AWG (3.31mm
2
- (2) x 2.08 - 1.31mm
2
)
Status Indicators C-Bus Indicator
Unit Status Indicator
Load Indicator
Dimensions 4 Channel - 5.67 x 3.35 x 2.56 inches (144 x 85 x 65mm)
12 Channel - 8.46 x 3.35 x 2.56 inches (215 x 85 x 65mm)
Weight 4 Channel - 14 oz (400g) (w/o Power Supply) 18 oz (510g) (w/Power Supply)
12 Channel - 21 oz (600g) (w/o Power Supply) 28 oz (800g) (w/Power Supply)
Mounting DIN rail, 4 Channel - 8M wide 12 Channel - 12M wide
Operating Environment 32°F to 113°F (0°C to 45°C) RH: 95%, noncondensing
Standards UL: Listed 508 Industrial Control Equipment
CSA 22.2 No. 14 Industrial Control Equipment
FCC: Part 15, Class B Digital Device
EN61000-4-2 Immunity to ESD
*For Diagram see technical section page 104
C-BUS
TM
LIGHTING CONTROL
+
OUTPUT UNITS
The C-Bus
TM
Relays are DIN-rail mounted units with four or twelve independent, voltage
free, relay contacts for general switching applications. They are suitable for use with
resistive, inductive, incandescent and uorescent loads.
Each channel is independently congurable and features a zero crossing magnetically
latching relay designed for switching the harsh electrical loads associated with today’s
high efciency lighting systems. Local toggle buttons are provided on each unit to allow
individual channels to be toggled at each unit or via C-Bus network commands. Remote
ON and OFF facilities are available, permitting all channels to be turned ON or OFF
without C-Bus Network communications.
Product Features
• Four or twelve independently operating
voltage free relay contacts
• Two convenient built-in C-Bus network
connectors (RJ-45)
• Units available both with and without a 200
mA power supply
• Non-volatile memory stores operating status
for recovery from power outage
• LED Indicators show the status of the
network and the unit
• Load Rating (4 and 12 channel 10 Amp rated
relay)
Resistive-10A
Inductive-10A
Fluorescent -10A
Motor -2A
Distributed Intelligence
• Compatible with all C-Bus devices and the
Powerlink
®
NF3000G3C controller
• Easily congured with the C-Bus Toolkit
Software
4 Channel 10 Amp Relay
C-Bus
TM
10 Amp Relay Unit
80