Technical information
Technical Information
Rated Voltage 120V & 277V 50/60Hz
Number of Units Use the C-Bus calculator, a software utility to
per Network determine total network current load or Toolkit software
Electrical isolation 3.5kV RMS from C-Bus to the line
Relays 20A
Short Circuit Current Rating 65kA (120V), 14kA (277V)
C-Bus Connections RJ45
Dimensions
12M Enclosure 12.78 in. x 9.09 in. x 4.0 in.
24M Enclosure 14.50 in. x 14.94 in. x 4.0 in.
Standards UL: Listed 508A, FCC part 15.101, Class B Device
EN61000-4-2 Immunity to ESD
*For Enclosure Diagram see technical section page 106
Catalog Number Enclosure Description
4 Channel 20A Relay Models
SLCZ042000T 12M 4 Channel 20A Relay @ 120V with power supply*
SLCZ042000H 12M 4 Channel 20A Relay @ 277V with power supply*
SLCZ042000TP 12M 4 Channel 20A Relay @ 120V without power supply
SLCZ042000HP 12M 4 Channel 20A Relay @ 277V without power supply
8 Channel 20A Relay Models
SLCZ082000T 24M 8 Channel 20A Relay @ 120V with power supply*
SLCZ082000H 24M 8 Channel 20A Relay @ 277V with power supply*
SLCZ082000TP 24M 8 Channel 20A Relay @ 120V without power supply
SLCZ082000HP 24M 8 Channel 20A Relay @ 277V without power supply
4 Channel 20A Relay Models with 0-10V Output Units
SLCZ04204AT 24M 4 Channel 20A Relay @ 120V with power supply and 4 Channel 0-10V Output Unit*
SLCZ04204AH 24M 4 Channel 20A Relay @ 277V with power supply and 4 Channel 0-10V Output Unit*
SLCZ04204ATP 24M 4 Channel 20A Relay @ 120V without power supply and 4 Channel 0-10V Output Unit
SLCZ04204AHP 24M 4 Channel 20A Relay @ 277V without power supply and 4 Channel 0-10V Output Unit
4 Channel Phase Angle Dimmer Models
SLCZ00004DT 12M 4 Channel Phase Angle Dimmer @ 120V with power supply
SLCZ00004DTP 12M 4 Channel Phase Angle Dimmer @ 120V without power supply
4 Channel 20A Relay Models with Phase Angle Dimmer Units
SLCZ04204DT 24M 4 Channel 20A Relay @ 120V with power supply and 4 channel phase angle dimmer unit
SLCZ04204DTP 24M 4 Channel 20A Relay @ 120V without power supply and 4 channel phase angle dimmer unit
* For stand-alone applications order unit with power supply
C-BUS
TM
LIGHTING CONTROL
+
AREA LIGHTING PANEL
The C-Bus
TM
Area Lighting Panels are ideally suited to meet lighting control energy code
requirements in classrooms, ofces and other small spaces. These devices provide the
ability to integrate keypads, occupancy sensing, light level detection, and switching
without the mess of complex control wiring. A simple CAT-5 cable is all that is required to
connect sensors and keypads.
Area Lighting Panels can operate as independent stand-alone islands or as part of an
entire facility wide lighting control system. Enclosures can easily be mounted in electrical
closets or in ceiling spaces. They include all necessary connections and are UL
Listed. Area Lighting Panels can also be used in conjunction with Powerlink
®
panels.
Area Lighting Panels can be used for on/off switching, stepped dimming or continuous
dimming applications. All relays feature rugged 20A rated contacts for switching
electronic ballast loads. Models with continuous dimming capabilities are rated for either
NEC Class 1 or Class 2 wiring.
Product Features
• Relay models: Four or eight relay outputs,
rated 20A
• 0-10V outputs for control of 0-10V dimmable
uorescent ballast (suitable for use with MARK
7
®
, Sylvania Quicktronic
®
, and Universal
SuperDim
®
)
• Integral neutral and ground bar terminal strips
• Plenum-rated for ceiling applications
• Bypass mode to facilitate quick start up
• Meets NEC Article 409
• UL Listed 508A, SCCR current ratings: 65kA
(120V), 14kA (277V)
• Surface Mount NEMA 1 Enclosure
Distributed Intelligence
• Compatible with all C-Bus devices and the
Powerlink
®
NF3000G3C controller
• Easily congured with Learn Mode or with
C-Bus Toolkit software
8 channel 20A Relay Area Lighting Panel
C-Bus
TM
Area Lighting Panels
87