Technical information

Catalog Number Description Accessories
SLC24MSG 24M DIN Enclosure
*
PK7GTA Ground/Neutral Bar
†
PKGTAB Neutral Insulator Kit†
* The enclosure comes with two DIN rails, two ground bars, and two insulated neutral terminal bars pre-installed on the mounting pan. Also included are 2 ft. of exible, Class 2 barrier,
four pan mounting screws, and four door mounting screws, and four DIN rail stops.
† Additional terminal bar and insulator for devices that require neutral connection points for loads, such as a relay unit.
Note: The C-Bus 24M Enclosure will accept one additional terminator bar (PK7GTA) intended for load neutral connections. This is to be used when the C-Bus unit
mounted inside requires neutral connection points for loads, i.e. a relay unit. Use in conjunction with a Neutral Insulator Kit (PKGTAB)
Technical Information
24M Enclosure
Type NEMA 1
DIN Module Capacity Two rows for mounting C-Bus DIN-mounted units. Each row can
hold one 12M unit, one 8M unit plus one 4M unit, or three 4M units
Dimensions 14.50 in. (W) x 14.94 in. (T) x 4.0 in. (D) [368 mm (L) x 379 mm (W) x 102 mm (D)]
Mounting DIN rail
Standard UL Standard 50 Enclosures for electrical equipment
Weight 18.9 lb (8.6 kg)
*For Diagram see technical section page 106
C-BUS
TM
LIGHTING CONTROL
+
ENCLOSURES
The C-Bus
TM
Enclosures provide a housing for various C-Bus DIN-mounted devices. The
24M enclosure is specically designed for distributed applications that require physical
proximity between DIN units and keypads, sensors or controlled loads.
Suitable for surface mounting, the 24M enclosure consists of a box with a hinged door and
two rows for mounting C-Bus DIN-mounted units. Each row can hold one 12M unit, one
8M unit plus one 4M unit, or three 4M units. The enclosure also has provisions for additional
neutral and ground bars.
Product Features
• Surface-mount NEMA 1 enclosure
• Welded sheet steel with knockouts
• Gray baked enamel, electrodeposited over
cleaned, phosphatized steel
• Triple-lead cover screws for fast installation
of cover
• Hinged trim for easy access
• DIN rail, suitable for mounting C-Bus DIN-
mounted C-Bus units. Each row can hold one
12M unit, one 8M unit plus one 4M unit, or
three 4M units.
• UL Listed
24M Enclosure
C-Bus
TM
24M Enclosure
90