Technical information

Catalog Number Description Accessories
SLC36C Enclosure Cabinet, 40 in. PK18GTA Neutral bar, 18 terminal
1,2,3
SLC36MFG Mounting pan with gray ush-mount cover PKGTAB Neutral insulator kit
SLC36MSG Mounting pan with gray surface-mount cover PK23GTA Ground bar, 23 terminal
4
SLC36MFW Mounting pan with white ush-mount cover SLCNT10 Isolated neutral terminal strip (10 position)
3, 5
SDM4AC Two duplex power receptacles
SDM8AC Four duplex power receptacles
PK4FL Door latch, locking
SLC4CSF8 Filler plate, 4M
SLC36LB L barrier
6
1
For use as a neutral bar; requires one grounding bar insulator kit (PKGTAB).
2
Maximum of four neutral terminal bars (two at top, two at bottom). Use neutral terminal bars in common neutral applications.
3
Mixing of neutral terminal bars and isolated neutral terminal strips is permitted. Mixing permits an additional bar at both top and bottom (three at top and three at bottom).
4
One ground bar is provided as standard. The pan will accept up to two additional ground bars.
5
Maximum of four isolated neutral terminal strips (two at top, two at bottom). Isolated neutral terminal strips allow individual neutrals to be maintained.
6
A second L barrier is required when neutral terminal bars or strips are mounted in both ends of the enclosure. A second L barrier cannot be used if a duplex power outlet
(SDM4AC or SDM8AC) is installed.
Technical Information
36M Enclosure
Type NEMA 1
DIN Module Capacity Three DIN rails, each with the capacity for one 12M,
one 8M with one 4M, or three 4M C-Bus DIN units
Dimensions with Cover 40.6 in. (L) x 15.4 in. (W) x 3.9 in. (D)
[1031 mm (L) x 392 mm (W) x 99 mm (D)]
Standard UL Standard 50 Enclosures for electrical equipment
Module Mounting DIN rail
Total Weight 57.7 lb (26.17 kg)
*For Diagram see technical section page 106
C-BUS
TM
LIGHTING CONTROL
+
ENCLOSURES
The C-Bus
TM
Enclosures provide a multi-purpose means for housing various C-Bus
DIN-mounted devices. Suitable for ush or surface mounting, the enclosure consists of
a cabinet, a mounting pan assembly, and a cover assembly. The cabinet can be ordered
separately, allowing for its installation with the rough-in of eld wiring. The mounting
pan comes with one L barrier, four horizontal barriers, and three DIN rails pre-installed.
Optional accessories are available to meet the needs of particular installations.
The 36M enclosure provides three rows for mounting DIN-mounted C-Bus units. Each
row has the capacity to hold one 12M unit, one 8M unit with one 4M unit, or three 4M
units.
Schneider Electric 36M Enclosures are specically designed for conventional installation
near the main breaker panel. They provide a simple means of installing C-Bus
DIN-mounted units with all of the necessary wiring, neutral bar, barriers and other
components included. Once installed, the enclosure system allows for easy system
maintenance with the units accessible.
Additional barriers provide greater exibility to meet requirements of NEC Article 725 for
separation of class 2 circuits.
Product Features
• NEMA
®
1 enclosure suitable for ush or
surface mounting
• Welded sheet steel with knockouts
• Gray baked enamel paint, electrodeposited
over cleaned, phosphatized steel
• Triple-lead cover screws for fast installation
of cover
• Three DIN rails, each suitable for mounting
C-Bus DIN units in one of the following
congurations:
One 12M unit
One 8M module with one (1) 4M unit
Three 4M units
• UL Listed
36M Enclosure
C-Bus
TM
36M Enclosures
91