Product specifications

150
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
SYSTEM MODEL NUMBERS
COMPONENT MODEL NUMBERS
ELECTRICAL
Input Voltage 18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
Input Power
24 VAC 23 VA nominal (without heater);
73 VA nominal (with heater)
24 VDC 0.7 A nominal (without heater)
Fuse 1.25 A
Auxiliary Outputs 2
Alarm Inputs 7
GENERAL
Construction
Back Box and Lower Dome Type 316L stainless steel
Bubble Polycarbonate, 0.090-inch thick
Light Attenuation 1 F-stop (smoked); zero light loss (clear)
V-Band Type 316L stainless steel
Pressure Relief Brass
Schrader Valve Brass
Connector Nickel-plated steel
Mounting 1.5-inch NPT, threaded
Pressurization
Valve Schrader
Pressure 8 psig (55 kPa) (not factory pressurized)
Pressure Relief 10 psig (69 kPa)
Operating Temperature (Assumes no wind chill factor; for detailed
test conditions, contact Pelco)
Maximum 140°F (60°C) absolute maximum; 122°F (50°C)
sustained maximum
Minimum –60°F (–51.11°C) absolute minimum; minimal
icing at sustained minimum of –50°F (–45°C);
prevents icing at sustained minimum of –40°F
(–40°C); de-ices 0.1 inch (2.5 mm) within
3 hours after power-up
Weight (approximate) Unit Shipping
Back Box 10.2 lb (4.6 kg) 13 lb (5.9 kg)
Lower Dome 3.3 lb (1.5 kg) 7 lb (3.2 kg)
CERTIFICATIONS/RATINGS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
• S Mark for Argentina
• Meets NEMA Type 6P and IP67 standards
OPTIONAL ACCESSORIES
IPS-CABLE Remote monitor cable and software kit
IPS-RDPE-2
†
Remote data port
EH8000RKIT Dry nitrogen recharging kit (cannot be refilled)
TXB Series
†
Translator boards for AD Manchester, Hernis,
Bosch
®
(Philips, Burle), TASS, and NTCIP
protocols
FS85011A
†
Fiber transmitter sends one unidirectional
composite video channel and one
bidirectional data channel over one optical
fiber. Available in multimode and single-mode
versions
Mounts IDM4012SS (stainless steel, wall), IWM
Series (wall), MRCA (ceiling), PP4348 (parapet
roof), and PP350/PP351 (parapet wall/roof)
†
If TXB or FS85011A boards are installed, it is not possible to upgrade system
operating software through the remote data port (IPS-RDPE-2).
Back Box Type
Lower
Dome
27X Day/Night
†
35X Day/Night
†
Environmental Pendant, Pressurized
Smoked SD427-PRE0 SD435-PRE0
Clear SD427-PRE1 SD435-PRE1
Environmental Pendant, Pressurized
Fiber Optic Feedthrough, Single-Mode
Smoked SD427-PRSE0 SD435-PRSE0
Clear SD427-PRSE1 SD435-PRSE1
Environmental Pendant, Pressurized
Fiber Optic Feedthrough, Multimode
Smoked SD427-PRME0 SD435-PRME0
Clear SD427-PRME1 SD435-PRME1
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
Back Box Lower Dome Dome Drive*
BB4-PR-E Environmental pendant, gray,
pressurized
BB4-PRS-E Environmental pendant, gray,
pressurized, fiber optic
feedthrough, single-mode
BB4-PRM-E Environmental pendant, gray,
pressurized, fiber optic
feedthrough, multimode
LD53PR-0 Lower dome with smoked bubble
LD53PR-1 Lower dome with clear bubble
DD427 Day/night (NTSC) camera (27X)
DD4CBW35 Day/night (NTSC) camera (35X)
DD5-FM Removable, fixed mount bracket only
(camera and lens not included);
interchangeable with all Spectra IV dome
drives
*For PAL and CCIR models add “-X” suffix to part number (for example: SD435-PRSE0-X or DD427-X)
Note: To order a fixed mount system, refer to the component models above and select a back box model, a lower dome model, and the DD5-FM dome drive. DD5-FM is
ideal for use with Pelco’s C10DN-6, C10DN-6X, C10CH-6, C10CH-6X, CCC1390H-6, and CCC1390H-6X cameras with selected Pelco lenses.
Apac Specbook.book Page 150 Tuesday, November 16, 2010 10:10 AM