Product specifications

152
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
SYSTEM MODEL NUMBERS
COMPONENT MODEL NUMBERS
GENERAL
Construction
Back Box Aluminum
Lower Dome Clear or smoked polycarbonate, 0.09-inch
thick
Cage Thickness 0.12 x 0.30 cast stainless steel
Cage Color Black, for maximum discreetness
Cable Entry (Back Box)
In-ceiling 0.75-inch conduit fitting
Pendant Through 1.5-inch NPT pendant mount
Weight (approximate)
Back Box Unit Shipping
In-ceiling 2.17 lb (0.98 kg) 6 lb (2.72 kg)
Pendant 4.45 lb (2.02 kg) 6 lb (2.72 kg)
Environmental Pendant 4.75 lb (2.15 kg) 5 lb (2.27 kg)
Lower Dome
In-ceiling 1.6 lb (0.73 kg) 3 lb (1.36 kg)
In-ceiling w/cage 3.6 lb (1.63 kg) 5 lb (2.27 kg)
Pendant 1.83 lb (0.83 kg) 3 lb (1.36 kg)
Pendant w/cage 3.83 lb (1.74 kg) 4 lb (1.81 kg)
Environment
In-ceiling Indoor only
Pendant Indoor/outdoor
Environmental Pendant Indoor/outdoor
Dimensions
Pendant 9.7" W x 10.1" H (24.64 cm x 25.65 cm)
In-ceiling 9.75" W x 8.5" H (24.77 cm x 21.59 cm)
Operating Temperature
In-ceiling 32° to 122°F (0° to 50°C)
Pendant 32° to 140°F (0° to 60°C) absolute maximum
operating temperature; 32° to 122°F (0° to
50°C) sustained maximum operating
temperature
Environmental Pendant (Assumes no wind chill factor; for detailed
test conditions, contact Pelco)
Maximum 140°F (60°C) absolute maximum; 122°F
(50°C) sustained maximum
Minimum –60°F (–51°C) absolute minimum; minimal
icing at sustained minimum of –50°F (–45°C);
prevents icing at sustained minimum of
–40°F (–40°C); de-ices 0.1 inch (2.5 mm)
within 3 hours after power-up
ELECTRICAL
Input Voltage 18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
Input Power
24 VAC 23 VA nominal (indoor, without heater)
73 VA nominal (outdoor, with heater)
24 VDC 0.7 A nominal (indoor, without heater)
3 A nominal (outdoor, with heater)
Fuse 1.25 A
Auxiliary Outputs 2
Alarm Inputs 7
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
• S Mark for Argentina
• Meets NEMA Type 4X, IP66 standards (Pendant models)
• Meets NEMA Type 1, IP40 standards (In-ceiling models)
• U.S. Patents D457,904 and D460,978
OPTIONAL ACCESSORIES
HD-KEYS 1 set of keys for heavy duty lower dome
IPS-CABLE Remote monitor cable and software kit
IPS-RDPE-2
§
Remote data port
TXB Series
§
Translator boards for AD Manchester, Hernis,
Bosch
®
(Philips, Burle), TASS, and NTCIP
protocols
TXB-IP Series
§
Communication module that allows you to
control and monitor Spectra IV dome systems
over an IP network (in-ceiling and pendant
models only).
FS85011A
§
Fiber transmitter modules
§
If TXB or FS85011A boards are installed, remote code upload of system will
not be possible.
Back Box Type
Lower
Dome
Cage 27X Day/Night
†
35X Day/Night
†
In-Ceiling
Clear
No SD427-HF1 SD435-HF1
Yes SD427-HCF1 SD435-HCF1
Indoor
Pendant
No SD427-HP1 SD435-HP1
Yes SD427-HCP1 SD435-HCP1
Environmental
Pendant
No SD427-HPE1 SD435-HPE1
Yes SD427-HCPE1 SD435-HCPE1
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
Back Box Lower Dome* Dome Drive
†
BB4HD-F In-ceiling, gray
BB4HD-PG Pendant, gray
BB4HD-PG-E Environmental pendant, gray
LD53HDF-1 Clear, in-ceiling
LD53HDCF-1 Clear, in-ceiling with cage
LD53HDPB-1 Clear, pendant
LD53HDCPB-1 Clear, pendant with cage
DD427 Day/night (NTSC) camera (27X)
DD4CBW35 Day/night (NTSC) camera (35X)
DD5-FM
‡
Removable, fixed mount bracket only
(camera and lens not included)
*Also available with smoked bubble. To order, replace the number 1 with a 0 (zero) in the model number (for example: SD435-HF0 or LD53HDF-0).
†
For PAL and CCIR models add “-X” suffix to part number (for example: SD427-HF1-X or SD435-HCF1-X).
‡
DD5-FM is ideal for use with Pelco’s C10DN-6, C10DN-6X, C10CH-6, C10CH-6X, CCC1390H-6, and CCC1390H-6X cameras with selected Pelco lenses.
Apac Specbook.book Page 152 Tuesday, November 16, 2010 10:10 AM