Product specifications

154
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
SYSTEM MODEL NUMBERS
COMPONENT MODEL NUMBERS
ELECTRICAL
Input Voltage 18 to 32 VAC; 24 VAC nominal
Input Power
24 VAC 73 VA nominal
24 VDC 3 A nominal
Fuse 1.6 A
Auxiliary Outputs 2
Alarm Inputs 7
GENERAL
Construction
Back Box 316 stainless steel; gray, polyurethane
powder coated finish
Lower Dome
Trim Ring 316 stainless steel; black, polyurethane
powder coated finish
Bubble Acrylic, clear or smoked
Cable Entry Through 1.5-inch NPT back box pendant
mount
Weight (approximate) Unit Shipping
Back Box 4.75 lb (2.15 kg) 7 lb (3.18 kg)
Lower Dome 1.83 lb (0.83 kg) 4 lb (1.81 kg)
Dome Drive 3.3 lb (1.48 kg) 4.9 lb (2.22 kg)
Environment Indoor/outdoor
Operating Temperature (Assumes no wind chill factor; for detailed
test conditions, contact Pelco)
Maximum 140°F (60°C) absolute maximum; 122°F (50°C)
sustained maximum
Minimum –60°F (–51.11°C) absolute minimum; minimal
icing at sustained minimum of –50°F
(-45.56°C); prevents icing at sustained
minimum of –40°F (–40°C); de-ices 0.1 inch
(2.5 mm) within 3 hours after power-up
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
• S Mark for Argentina
• Meets NEMA Type 4X, IP66 standards when installed properly
OPTIONAL ACCESSORIES
IPS-CABLE Remote monitor cable and software. See
www.pelco.com for a list of compatible
devices.
IPS-RDPE-2 Remote data port. 24 VAC, wall/pole mount
video/data breakout box. Allows ground-level
control/programming and software upgrades
when used with the IPS-CABLE.
TXB Series
‡
Translator boards for AD Manchester, Hernis,
Bosch
®
(Philips, Burle), TASS, and NTCIP
protocols.
TXB-IP Series
‡
Communication module that allows you to
control and monitor Spectra IV dome systems
over an IP network (in-ceiling and pendant
models only).
FS85011A
‡
Fiber transmitter sends one unidirectional
composite video channel and one
bidirectional data channel over one multi-
mode or single-mode fiber optic cable.
‡
If TXB/TXB-IP Series or FS85011A boards are installed, it is not possible to
upgrade system operating software through the remote data port
(IPS-RDPE-2).
RECOMMENDED POWER SUPPLIES
WCS Series Single/multiple 24 VAC camera power supply,
outdoor
RECOMMENDED MOUNT
IDM4012SS Stainless steel wall mount with feed-through
capabilities
Back Box Type
Lower
Dome
27X Day/Night* 35X Day/Night*
Environmental
Pendant
Smoked SD427-PSGE0 SD435-PSGE0
Clear SD427-PSGE1 SD435-PSGE1
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
Back Box Lower Dome Dome Drive*
BB4-PSG-E Environmental
Pendant mount,
gray 316 SS
LD53PSB-0 Smoked, pendant,
black trim ring 316 SS
LD53PSB-1 Clear, pendant, black
trim ring 316 SS
DD427 Day/night (NTSC) camera (27X)
DD4CBW35 Day/night (NTSC) camera (35X)
DD5-FM
†
Removable, fixed mount bracket only (camera and lens not
included); interchangeable with all Spectra IV dome drives
*For PAL and CCIR models add “-X” suffix to part number (for example: SD427-PSGE0-X or DD427-X)
†
DD5-FM is ideal for use with Pelco’s C10DN-6, C10DN-6X, C10CH-6, C10CH-6X, CCC1390H-6, and CCC1390H-6X cameras with selected Pelco lenses.
Apac Specbook.book Page 154 Tuesday, November 16, 2010 10:10 AM