Product specifications

167
PRODUCT SPECIFICATION
camera solutions
C311 / REVISED 11-2-10
International Standards
Organization Registered Firm;
ISO 9001 Quality System
ES30PC/ES31PC Series Positioning System
ESPRIT
®
WITH PRESSURIZED IOC AND OPTIONAL WIPER
Product Features
• Receiver, Pan/Tilt, and Enclosure with Pressurized Integrated Optics
Cartridge (IOC), NTSC/PAL
• All Components Factory Assembled and System Tested
• Pressurized Integrated Optics Cartridge Factory Charged to 10 psig
• Solid-State Sensors For Temperature, Pressure, and Dew Point
• On-Demand Environmental Status Display For Temperature,
Pressure, and Dew Point
• On-Screen Multiple Fault Alert Modes
• On-Screen Compass, Tilt, and Zoom Display
• On-Screen Configurable Zone Blanking
• On-Screen Configurable Menus For Pan/Tilt, Camera, and Sensor
Alert Settings
• All Standard Features of the Esprit
®
Positioning System
• Wide Dynamic Range (35X only)
Pelco’s ES30PC/ES31PC Esprit
®
Positioning System is optimally
designed to protect camera optics and electronics from moisture and
airborne contaminants. The system features a receiver, pan/tilt,
enclosure, and a pressurized Integrated Optics Cartridge (IOC).
The ES30PC/ES31PC system’s IOC packages an auto focus camera,
lens, heater, and sensors in a small, self-contained, sealed unit. Dry
nitrogen pressurized to 10 psig protects the environment inside the
cartridge eliminating internal condensation and corrosion. Sensors
strategically placed in the cartridge send an “Alert” message if
changes in pressure, temperature, and humidity are beyond factory
set acceptable limits. The sensors also allow for instant on-screen
display of temperature, pressure, and dew point.
The IOC is factory assembled and installed in the ES30PC/ES31PC
systems. All labor intensive procedures of setting up the camera, lens
and charging the unit with dry nitrogen are eliminated. The miniature
size of the cartridge decreases the future need for maintenance and
increases the overall reliability of the pressurized unit.
The ES30PC and ES31PC Series feature three models of pressurized
IOCs:
• Day/night camera (540 TVL) with an infrared cut filter, 35X zoom
lens (35X optical, 12X digital), electronic image stabilization, and
wide dynamic range
• Day/night camera (520 TVL) with an infrared cut filter and
24X zoom lens (24X optical, 10X digital)
• High resolution color camera (470 TVL) with LowLight
™
color
technology and 22X zoom lens (22X optical, 10X digital)
A powder-coated, aluminum construction makes the ES30PC and
ES31PC ideal for either indoor or outdoor applications. The system
has an absolute operating temperature range of –50° to 140°F
(-45° to 50°C). Within two hours after power-up, the entire unit can
de-ice and be operational from a temperature of –13°F (–25°C).
The ES31PC Series has a window wiper completely integrated into
the enclosure and designed not to interfere with the viewing range of
the system. The wiper can be configured to delay between wipes and
to shut off automatically after a specified period. The wiper design
also allows for easy replacement of the wiper blade.
The ES30PC and ES31PC Series variable pan and tilt speeds range
from 0.1 to 40 degrees per second in manual pan mode and
0.1 to 20 degrees per second in manual tilt. Pan preset and turbo
speeds are 100 degrees per second in wind speeds up to 50 mph
and 50 degrees per second in the 90 mph wind-speed profile. Tilt
preset speed is 30 degrees per second. The ES30PC and ES31PC
are capable of 360 degrees of continuous pan rotation. The tilt
range allows for horizontal viewing of +33 to –83 degrees. There are
64 configurable preset positions with a preset accuracy of
one-quarter degree.
The systems are available with an input voltage of 24 VAC or with a
selectable power source of 120/230 VAC. The ES30PC and ES31PC
also have a power-up recovery mode that allows the user to specify
what operation the system will resume whenever the power is cycled.
Apac Specbook.book Page 167 Tuesday, November 16, 2010 10:10 AM