Product specifications

174
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
MODEL NUMBERS
MODELS
Basic
ES3012-2 Standard Esprit integrated positioning
system (pan/tilt, enclosure and receiver),
24 VAC, no mount
ES3012-5 Same as ES3012-2 except 120/230 VAC
ES3012-2N Standard Esprit integrated positioning
system, 24 VAC, with EPP pedestal adapter
plate
ES3012-5N Same as ES3012-2N except 120/230 VAC
ES3012-2W Standard Esprit integrated positioning
system, 24 VAC, with EWM wall mount
ES3012-5W Same as ES3012-2W except 120/230 VAC
ImagePak Esprit Systems
Create a complete, ready-to-install system (including optics package) from the
optional components below or refer to the Esprit ImagePak Selection Guide
for model numbers.
OPTIONAL MOUNTS AND ADAPTERS
ECM100 Corner mount adapter for use with EWM wall
mount
EPM Pole mount adapter for use with EWM wall
mount
EA4348 EWM-to-Legacy adapter; use with PP4348
parapet mount
PM2000/PM2010 Pedestal mount with cable feedthrough;
for use with Esprit systems with EPP pedestal
adapter plate
PP4348 Parapet mount; requires EWM wall mount
and EA4348 adapter when used with Esprit
system
OPTIONAL ACCESSORIES
IPS-RDPE-2 Remote data port. 24 VAC, wall/pole mount
video/data breakout box. Allows ground-level
control/programming when used with the
IPS-CABLE. (No code upload.)
IPS-CABLE Remote monitor cable and software kit.
TXB Series Translator boards for model specific AD
™
Manchester, Hernis, Bosch
®
(Philips, Burle),
Sensormatic
®
, Vicon
™
, TASS, and NTCIP
protocols.
RECOMMENDED POWER SUPPLIES
MCS Series Multiple 24 VAC camera power supply, indoor
WCS Series Single/multiple 24 VAC camera power supply,
outdoor
RECOMMENDED CONTROLS
All Pelco multiplexer and matrix switchers (CM6700, CM6800,
CM9700 Series, MPT9000, and MX4000 Series) and PelcoNet
™
Series.
RECOMMENDED KEYBOARD CONTROLS
(For use in Direct Mode operation only)
KBD200A Desktop keyboard, multispeed PTZ control
KBD300A Desktop keyboard, variable speed PTZ control
Note: KBD keyboards require a remote keyboard wiring kit (KBDKIT) for direct
mode operation; allows two-wire control of up to 16 daisy-chained receivers
(or Esprit systems). Keyboards output Pelco P protocol at 4800 baud.
Contract #GS-07F-9323S
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
ES3012-5CLZ20PW
Esprit Series
ES3012
Primary Input Voltage
-2 = 24 VAC
-5 = 120/230 VAC
Camera Configuration
Color
AM = C10DN-6 Ultra High Res, Day/Night (NTSC)
AN = C10DN-6X Ultra High Res, Day/Night (PAL)
CL = CC3751H-2 High Res, LowLight (NTSC)
CM = CC3651H-2X High Res, LowLight (PAL)
CB = CC3701H-2 High Res, EDR (NTSC)
CD = CC3701H-2X High Res, EDR (PAL)
AJ = C10CH-6 Ultra High Res, color (NTSC)
AK = C10CH-6X Ultra High Res, color (PAL)
Lens Configuration
Z10 = 13ZD6X10 10X, 6-60 mm
Z10P = 13ZD6X10P 10X, 6-60 mm, with presets
Z20 = 13ZD5.6X20 20X, 5.6-112 mm
Z20P = 13ZD5.6X20P 20X, 5.6-112 mm, with presets
Z30 = 13ZD5.5X30 30X, 5.5-165 mm
Z30P = 13ZD5.5X.30P 30X, 5.5-165 mm, with presets
Mount Configuration
N = EPP pedestal adapter
W = EWM wall mount
Apac Specbook.book Page 174 Tuesday, November 16, 2010 10:10 AM