Product specifications

181
PRODUCT SPECIFICATION
camera solutions
C1306 / REVISED 10-29-10
International Standards
Organization Registered Firm;
ISO 9001 Quality System
EHXM Series Explosionproof Camera System
CAMERA SYSTEM WITH IOP CAMERA AND OPTIONAL WIPER
Product Features
• Electropolished 316L Stainless Steel Construction
• Upright or Inverted Installation
• Manual 200° Pan and 180° Tilt Adjustments
• Receiver and Enclosure with Integrated Optics Package (IOP)
• For Use in a Variety of Harsh and/or Hazardous Environments,
including Marine Environments
• 2 Auto Focus, High Resolution Integrated Camera/Optics Packages
–
23X Day/Night, 80X Wide Dynamic Range, Motion Detection, and
540 TVL Horizontal Resolution
– Color 22X EXview HAD
™
– Multilingual On-Screen Menus
– Password Protection
– Autofocus with Manual Override
– Configurable Camera Settings
– Auto Iris with Manual Override
• Integral Multiprotocol Receiver/Driver
• Meets NEMA Type 4X and IP66 Standards
• Designed for Minimal Maintenance
• Password Protection
• On-Board Connector for
–
Pelco VC-UTP Video Connector
– Pelco TXB Series Translator Boards for Use with Hernis and Other
Protocols
– Pelco FS85011A and Third-Party Fiber Optic Transmitters
The EHXM Series explosionproof camera enclosures are designed to
meet the rigorous requirements of explosionproof and dust-
ignitionproof electrical equipment for installation and use in hazardous
locations. The system can be installed in a standard or inverted
position and features manually adjustable 200 degrees of pan and
180 degrees of tilt positioning.
All units feature an integrated camera and lens package with LowLight
™
technology. The day/night model features a 23X lens, built-in motion
detection and 80X wide dynamic range imager. The color camera has a
22X lens and EXview HAD
™
imager for increased sensitivity.
The electropolished 316L stainless steel construction makes the
EHXM Series ideal for either indoor or outdoor applications. The
system has an absolute operating temperature range of –76° to 140°F
(–60° to 60°C). Within two hours after power-up, the entire unit can
de-ice and be operational from a temperature of –13°F (–25°C).
The systems are available with an input voltage of 24 VAC or with a
power source of 100 to 240 VAC.
The EHXM Series includes an optional window wiper. The wiper is
completely integrated into the enclosure and does not interfere with the
viewing range of the system. The wiper can be configured to delay
between wipes and to automatically shut off after a specified period.
The wiper design also allows for easy replacement of the wiper blade.
A built-in heater, window defroster/defogger, sun shroud, and blower
are standard features on the EHXM Series units. All units also include
three auxiliary output relays that can be configured for a variety of uses
including third-party washer systems.
Also available are video conversion modules for applications using
unshielded twisted pair (UTP) and fiber. Refer to OPTIONAL
ACCESSORIES for information.
Apac Specbook.book Page 181 Tuesday, November 16, 2010 10:10 AM