Product specifications

SYSTEM COMPONENTS AND ACCESSORIES
205
MODELS
CONTROLLER
CM9700-CC1 CPU controller; operates on 120 VAC, 60 Hz or
230 VAC, 50 Hz. (4 RUs).
CM9700-SER Serial communication card (RS-422 SERCOM)
provides eight communications ports to
interface peripheral equipment (4 maximum per
CPU).
CM9700-SER-32 Port expansion unit; 32 serial communication
(SERCOM) ports per unit. Up to three units can
be added to a CC1 (contact Pelco’s System
Applications Department before adding to an
existing CM9700-CC1). Includes interconnect-
ing cables and adapters for DB9 and RJ45
connectors. Data interface can be RS-232 or
RS-422. (4 RUs).
MATRIX BAY
CM9765-MXB
Video matrix bay equipped with CM9700-MPS
power supply; 100 to 240 VAC, 50/60 Hz,
autoranging (6 RUs).
CM9700-MPS Matrix bay power supply (spare); 120 VAC,
60 Hz or 230 VAC, 50 Hz.
CM9765-DFC Down frame card and cable assembly; connects
multiple matrix bays for expansion purposes.
CM9765-VCC Video camera card capable of accepting up to
32 camera inputs. Also requires a rear panel
card (CM9765-DFC, CM9765-RPC).
CM9765-RPC Rear panel video card; provides 32 BNC
connectors used to connect camera inputs to
matrix bay.
CM9765-VMC Video monitor card providing 16 monitor
outputs; requires CM9765-RPM.
CM9765-RPM Rear panel monitor card; provides 16 BNCs to
connect monitor outputs to matrix bay; also
interfaces video output signals from video
output card.
CM9765-RPS Rear panel side frame/down frame card; use
when side framing and down framing.
CM9700-VPP Video patch panel; provides 32 BNC inputs for
bringing video inputs into the system or 32 BNC
connections for looping video out of the system;
includes 16-channel coaxial ribbon cable,
3 feet (0.91 m). (3 VPP units = 2 RUs;
actual height of each VPP is 1.07 inches [2.7 cm])
CM9700-CBL-06FT 16-channel coaxial ribbon cable, 6 ft (1.82 m)
CM9700-CBL-10FT 16-channel coaxial ribbon cable, 10 ft (3.04 m)
CM9700-VPP video patch panels can be mounted horizontally into a standard
EIA rack. A cable management bracket is attached to each end of the video
patch panel.
OPTIONAL COMPONENTS
The following components are compatible with the 9765 System:
KEYBOARDS
CM9760 Keyboard Controller
The CM9760 keyboard controller allows the user to control the system. The
keyboard includes a variable speed, vector-solving joystick with zoom control
knob for pan/tilt/zoom (PTZ) and dome control. From the keyboard, the user
can control GPI-activated devices, receivers, camera/monitor switching, and
multiplexer screen functions, and create single/dual patterns, zones, zone
labels, presets and preset recalls. The user can also arm and disarm alarms
as well as implement stand-alone, direct mode operation. Twenty-four
programmable soft keys can be individually labeled allowing logical camera
selection based on the camera’s field of view rather than camera numbers.
CM9760-KBD Full-function desktop variable speed keyboard,
white finish; 100 to 240 VAC, 50/60 Hz.
CM9760-KBD-B Full-function desktop variable speed keyboard,
black finish; 100 to 240 VAC, 50/60 Hz.
CM9760-KBR Full-function 19-inch EIA rack mount keyboard
(4 RUs); available in black finish only; 100 to 240
VAC, 50/60 Hz.
A suffix of -US, -UK, -AU, or –EU, designating a region-specific power cord,
is added to the above model numbers when ordering. For example, a
CM9760-KBD-US is a desktop keyboard (white finish) with a power cord for
use in the United States.
KBD200A Keyboard Controller
The KBD200A provides control of camera/monitor switching; reset, pattern,
and sequence operation; local and receiver auxiliary operation; and
multiplexer screen functions. The KBD200A also provides push-button control
of PTZ functions. (A KBDKIT is required for power.)
KBD200A Desktop keyboard with full switching
capabilities, plus push-button control of PTZ
functions. 12 VAC or ±12 VDC. (Requires
KBDKIT for power.)
KBD300A Keyboard Controller
The KBD300A provides control of camera/monitor switching; preset, pattern,
and sequence operation; local and receiver auxiliary operation; and
multiplexer screen functions. The KBD300A also provides joystick control of
PTZ functions. (A KBDKIT is required for power.)
KBD300A Desktop keyboard with full switching
capabilities, plus joystick control of PTZ
functions. 12 VAC or ±12 VDC. (Requires
KBDKIT for power.)
NETWORK INTERFACE UNIT
The CM9700-NW1 network interface unit allows multiple systems to share
video and control.
CM9700-NW1 Network interface unit; network CPU and
software necessary for joining two or more
independent systems together. (4 RUs).
CM9700-VPP FRONT PANEL
Apac Specbook.book Page 205 Tuesday, November 16, 2010 10:10 AM