Product specifications

208
SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS
CENTRAL PROCESSING UNIT (CC1)
The central processing unit communicates with external devices and accepts
commands from external computers, keyboards, graphical user interfaces
(GUIs), access control systems, casino data systems, programmable logic
controllers (PLCs), and lighting and intercom systems. An internal VGA card is
included for displaying system diagnostics and for programming. RS-422 COM
ports are provided for communication with external devices such as matrix
switching bays, pan/tilt or dome receivers, and keyboards.
ELECTRICAL
Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, autoranging
Power Consumption 57 W
Diagnostic Monitor Output One VGA
I/O Ports Sixteen RS-422 ports (expandable to 32); total
system capability is 120 ports*
Two RS-232 ports
One parallel printer port
One VGA output port
Two PC-AT compatible keyboard ports
GENERAL
Operating Temperature 32˚ to 120˚F (0˚ to 49˚C)
Dimensions 19.50" D x 19.00" W x 7.00" H
(49.53 x 48.26 x 17.78 cm)
Mounting Fits 19-inch EIA-standard rack (4 RUs)
Unit Weight 29.7 lb (13.5 kg)
Shipping Weight 43 lb (19.5 kg)
CERTIFICATIONS
•
CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
MATRIX SWITCHING BAY
Each bay includes a power supply and mounting baffle and will support
modules for up to 256 camera inputs and 32 monitor outputs. Multiple bays
can be used to expand a single CPU system to a maximum of 2,048 camera
inputs and 512 monitor outputs. An optional backup power supply module
(MPS) can be installed in each bay to provide redundancy.
ELECTRICAL
Input Voltage 100-240 VAC, 50/60 Hz, autoranging
Power Consumption 60 W maximum (fully populated)
Communication Full duplex RS-422 using an RJ-45 connector
VIDEO
Bandwidth 15 MHz
Signal-to-Noise Ratio
-70.5 dB
Adjacent Channel Crosstalk
-60.9 dB at 3.58 MHz
Differential Gain
0.51%
Differential Phase
0.38 degrees
Line T
ilt 0.40%
Field T
ilt 0.59%
Switching Time 16 mS
Inputs Card slots support up to 256 inputs per bay
Outputs Two output card slots for supporting 32 outputs
per bay
Video Input Level 0.5 to 2 Vp-p, RS-170 composite video
Impedance 75 ohms terminating (looping versions
available)
V-Sync The Pelco V-Sync signal (sent up the coax cable)
provides a synchronization pulse which allows
roll-free switching between cameras within the
same matrix bay
Vertical Drive Input connector available on rear panel
Overall Frequency Response Flat to 8 MHz
Luminance Nonlinearity 20%
GENERAL
Operating Temperature 32˚ to 122˚F (0˚ to 50˚C), non-condensing
Dimensions
Matrix Bay 21.70" D x 19.00" W x 10.50" H
(55.10 x 48.26 x 26.67 cm)
Mounting Baffle** 24.00" D x 19.00" W x 1.75" H
(60.96 x 48.26 x 4.45 cm)
Mounting Fits 19-inch EIA-standard rack (matrix bay:
6 RUs; mounting baffle: 1RU)
Unit Weight 33 lb (14.99 kg)
52 lb (23.59 kg), fully populated
Shipping Weight 44 lb (19.96 kg)
62 lb (28.12 kg), fully populated
CERTIFICATIONS
•
CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
*The CM9700-CC1 is equipped with 16 RS-422 COM ports; total capacity can be expanded to 32 ports by adding two CM9700-SER serial communication cards (8 ports each).
Total system capability can be expanded to 120 RS-422 COM ports by adding three CM9700-SER-32 port expansion units (32 ports each) to the CC1.
**Included with each MXB unit. Total height of MXB with baffle installed is 12.25 inches (31 cm).
Apac Specbook.book Page 208 Tuesday, November 16, 2010 10:10 AM