Product specifications

210
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
SYSTEM COMPONENTS AND ACCESSORIES
MISCELLANEOUS
CM9760-ALM Alarm interface unit; connects directly to each
system; each unit can monitor up to 64 alarms
and up to four units can be connected in a
series from one SERCOM port. (1 RU).
CM9760-CDU-T Code distribution unit; 16-channel RS-422
transmit only (two data wires and ground)
distributor. Primarily used for wiring up to
16 pan/tilt/zoom receivers in a “star”
configuration. (1 RU).
CM9760-CXTA Coaxitron
®
translator; generates Coaxitron
signals for Pelco Coaxitron receivers; each
translator supports up to 16 receivers. (1 RU).
CM9760-DMR Data merger and port expander unit; this unit
allows multiple CM9700-CC1 units to control
multiple pan/tilt/zoom cameras and allows
multiple keyboards to communicate through
one CC1 port. (1 RU).
CM9760-DMR-X Same as CM9760-DMR except 230 VAC, 50 Hz.
CM9760-HS Hot switch interface unit; changeover unit that
monitors the status of a primary CC1 in a
9770 system: three components, 1 RU each.
CM9760-MDA Master distribution amplifier; inserts master
time and date from the CM9700-CC1 and a
programmable title of up to 24 characters on
one to sixteen video signals. (3 RUs).
CM9760-MDA-X Same as CM9760-MDA except 230 VAC, 50 Hz.
CM9700MDD-EVS Matrix digital decoder (NET5301R optimized for
use with matrix) that converts digital video
streams from Endura products into analog video
to be viewed and controlled on a Pelco CM9700
Series matrix switcher.
CM9760-REL Relay interface unit; connects directly to each
system and provides dry contact switching for
direct or automatic control of peripheral
equipment; each unit provides up to 64 SPST
contact outputs. (1 RU).
CM6800E-48X8 Satellite video matrix switcher. Allows the user
to distribute switching capability around a
facility, reducing the number of coaxial cable
runs to the matrix and allowing monitoring at
the satellite switch location. Supports up to
48 inputs, or up to 96 inputs in a 96x16
configuration. (3 RUs).
Genex
®
Multiplexers Genex Series MX4009 (9-channel) and MX4016
(16-channel) multiplexers. (1 RU).
COMPATIBLE RECEIVERS
Spectra
®
Series Spectra dome multiple protocol receiver.
ERD97P21-U Pelco P protocol receiver.
LRD41C21-1/-2/-3 Legacy
®
‚ fixed speed receiver with presets.
LRD41C22-1/-2/-3 Same as LRD41C21 Series except variable
speed receiver.
Esprit
®
Integrated pan/tilt positioning receiver.
Coaxitron Coaxitron translator allows Coaxitron control of
PTZ cameras.
ExSite
®
Integrated explosionproof positioning system.
RU = Rack Unit. One RU is equivalent to 1.75 inches (4.45 cm) of vertical
space. Identifies number of rack units required to mount component in a
19-inch EIA-standard rack mount.
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
CM9700 CC1
CAMERA 1 CAMERA 257
MONITOR 1
MONITOR 16
MONITOR 17
MONITOR 32
CM9765-MXB
CAMERA 704
CM9765-MXB
CM9765-MXB
CM9765-MXB
CM9765-MXB
CM9765-MXB
Apac Specbook.book Page 210 Tuesday, November 16, 2010 10:10 AM