Product specifications

228
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODEL
CM9760-REL Relay interface unit
ELECTRICAL
Input Voltage 100 to 230 VAC, 50/60 Hz, autoranging
Power Consumption 30 VA (reactive consumption); 5 W (active)
Data Ports
Input RS-422, RJ-45 connector
DIP switch selectable baud rate
Output RS-422, RJ-45 connector
DIP switch selectable baud rate
Indicators Two power LEDs (green)
One data LED (red)
Fusing 500 mA, 250 V
Relay Output
Contact Parameters
Maximum Switching
Capacity 60 W
Maximum Operating
Voltage 125 VAC/VDC
Maximum Current 2 A
Contact Resistance 75 milliohms
Rated Load
Parameters 0.5 A at 125 VAC
2 A at 30 VDC
MECHANICAL
Connectors
REL Input Four dual-header, 32-input connectors with
mating plugs
Power 3-wire, 18 AWG
RS-422 Two RJ-45 connectors
RS-232 One, DB9 connector (factory use only)
Relay Out One, 3-pin header with mating plug
GENERAL
Operating Temperature 32˚ to 122˚F (0˚ to 50˚C)
Dimensions
Base Only 1.75" H x 17.40" W x 8.15" D
(4.45 x 44.20 x 20.70 cm)
With Rack Ears 1.75" H x 19.00" W x 8.15" D (1 RU)
(4.45 x 48.26 x 20.70 cm)
Mounting Fits 19-inch EIA-standard rack
Unit Weight 8.0 lb (3.64 kg)
Shipping Weight 13 lb (5.91 kg)
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
CM9700-CC1
CM9760-REL
CM9760-REL
64 ADDRESSABLE
RELAY OUTPUTS
64 ADDRESSABLE
RELAY OUTPUTS
TYPICAL CONFIGURATION
Apac Specbook.book Page 228 Tuesday, November 16, 2010 10:10 AM