Product specifications

TECHNICAL SPECIFICATIONS
249
SYSTEM
Operating System Linux
®
RAID Level RAID 6
Effective Capacity Up to 18.1 TB
Drive Interface SAS/SATA
Recommended PC Requirements
Web Browser Internet Explorer
®
6.x (or later) with Adobe
®
Flash
®
Player 10 (or later)
NETWORK
Interface 2, 1 Gbps Ethernet RJ-45 ports (1000Base-T)
Auxiliary Interfaces
USB 2.0 3 ports (2 rear, 1 front)
FRONT PANEL INDICATORS
Power Blue Pelco badge
Software Status Green, amber, red (based on diagnostics)
Ethernet Port 1 Green, red
Ethernet Port 2 Reserved
Hardware Status Green, red
Hard Drive Status Green, red
POWER
Power Input 100 to 240 VAC, 50/60 Hz, autoranging
Power Supply Internal, dual-redundant, hot swappable
Power Consumption Operating Average
100 VAC 262 W, 2.65 A, 895 BTU/H
115 VAC 263 W, 2.31 A, 895 BTU/H
220 VAC 254 W, 1.25 A, 868 BTU/H
ENVIRONMENTAL
Operating Temperature 50° to 95°F (10° to 35°C) at unit air intake
Storage Temperature –40° to 149°F (–40° to 65°C)
Operating Humidity 20% to 80%, noncondensing
Maximum Humidity Gradient 10% per hour
Operating Altitude –50 to 10,000 ft (–16 m to 3,048 m)
Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of
0.5 octave/minute
Note: The temperature at the unit air intake can be significantly higher than
room temperature. Temperature is affected by rack configuration, floor
layout, air conditioning strategy, and other issues. To prevent hard disk drive
failure and unit damage, make sure the temperature at the air intake of the
unit is continuously within the operating temperature range.
PHYSICAL
Construction Steel cabinet
Finish
Bezel Gray metallic with black end caps
Chassis Black matte finish
Dimensions (without rails) 24.3" D x 17.0" W x 5.2" H
(61.8 x 43.2 x 13.2 cm)
Unit Weight
Empty (without drives) 46.4 lb (21 kg)
Loaded (with drives) 66.8 lb (30 kg)
Shipping Weight 77.0 lb (35 kg)
Mounting Options Rack, 3 RU per unit
(rack rails and hardware are supplied)
Apac Specbook.book Page 249 Tuesday, November 16, 2010 10:10 AM