Product specifications

263
PRODUCT SPECIFICATION
video management solutions
C603 / REVISED 10-29-10
International Standards
Organization Registered Firm;
ISO 9001 Quality System
NET5301T-I Intelligent Video Encoder
DUAL-STREAM, NTSC/PAL
Product Features
• Powerful Video Analytics Processing at the Edge
• Encode and Transmit 2 Simultaneous MPEG-4 Video Streams
• Up to 30 NTSC (25 PAL) High Quality (4CIF) Images per Second
per Stream
• Video, Audio, and Data over IP Network
• Simultaneously View Video on a Computer User Interface, Console
User Interface, and V
ideo Decoder While Recording to an Endura
®
Video Recorder
• Adaptive Deinterlacing Technology
• 3 Programmable Alarm Inputs (Supervised or Unsupervised),
1 Relay
Output
• 2 Security Modes
• Video Loss Indicator
• PTZ Support Through Pelco P/Pelco D (RS-422) and Coaxitron
®
(up-the-coax) Protocols
• Optional Wall and Rack Kits; Rack Kit Will Accommodate up to
12 Units
The NET5301T-I intelligent video encoder is a dual-purpose video
encoding unit and video analytics processor. As a video encoder, it
converts live analog video into dual MPEG-4 video streams. It can
process up to 30 NTSC (25 PAL) images per second (ips) per stream at
4CIF resolution. In addition, the NET5301T-I uses motion adaptive
deinterlacing technology to reduce jitter in 4CIF images.
The NET5301T-I adds a sophisticated video analytics engine to the
video encoder function. Once installed and configured, object and
activity detection behaviors can interpret activity in the field of view
and trigger an alarm when unwanted activity is detected. This ability
to process video analytics at the edge conserves network bandwidth;
the unit only transmits video streams that have triggered an analytics
alarm.
The unit also improves operator effectiveness when monitoring both
large and small installations. These sophisticated analysis
techniques monitor each frame of video and only alert the operator to
cameras and scenes that warrant attention.
Like all Endura
®
encoders, the NET5301T-I incorporates
EnduraView
™
video optimization technology to select the best image
quality and frame rate for the target Endura product (decoder,
workstation, console), all without affecting the system recording
rate. For example, the unit selects a high rate and quality setting for
recording and automatically selects a lower rate for viewing in a
multiple view format.
The NET5301T-I can be configured for three alarm inputs and one
relay output. When an alarm event is triggered, the unit can send a
message to an operator, trigger a relay, and implement video
recording.
The NET5301T-I also supports activity detection. You can configure
up to three activity zones, each with its own independent sensitivity
and threshold settings. When the NET5301T-I detects activity in any
of these areas, it can trigger an alarm event.
The unit supports one audio input over the network. The system
operator (security personnel) can see and hear activity in the target
area.
The NET5301T-I can run in both unsecured and secured modes. The
secure mode uses a proprietary key system to prevent unauthorized
devices from communicating with a NET5301T-I over the Endura
network.
All Endura products support Pelco P/Pelco D and Coaxitron
®
protocols. As a result, the NET5301T-I supports control of remote
peripherals such as pan/tilt/zoom (PTZ) cameras.
Apac Specbook.book Page 263 Tuesday, November 16, 2010 10:10 AM