Product specifications

296
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODEL
RK5200PS-5U Rack mount chassis for up to 12 Endura
modules; redundant internal power supply
GENERAL
Dimensions 15.50" D x 17.70" W x 8.72" H
(39.37 x 44.96 x 22.15 cm)
Mounting Fits 19-inch (48.26 cm), EIA-standard rack
Unit Weight 12.7 lb (5.76 kg), with power supply
37.8 lb (17.15 kg), fully populated
Shipping Weight 44.0 lb (19.93 kg)
ELECTRICAL
Input Voltage 100-240 VAC, 50-60 Hz, autoranging
Output Voltage 12 VDC
Power Consumption Operating Maximum*
100 VAC 75 W, 256 BTU/H
†
115 VAC 75 W, 256 BTU/H
†
220 VAC 70 W, 239 BTU/H
†
Fuse 4 A/250 V
Redundant Capability Yes, hot swappable
MECHANICAL
Number of Slots 12 for modules and 2 for power supply
Module Orientation Vertical
Rack Units
‡
5 (includes thermal management)
Construction Aluminum
Finish Black
ENVIRONMENTAL
Operating Temperature 41° to 95°F (5° to 35°C) at air intake
(front of unit)
Storage Temperature –40° to 149°F (–40° to 65°C)
Operating Humidity 20% to 80% noncondensing
Maximum Humidity Gradient 10% per hour
Operating Altitude –50 ft to 10,000 ft (–16 m to 3,048 m)
Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of
0.5 octaves/minute
Note: The temperature at the unit air intake can be significantly higher than
room temperature. Temperature is affected by rack configuration, floor layout,
air conditioning strategy, and other issues. To prevent performance failure and
unit damage, make sure the temperature at the unit is continuously within the
operating temperature range. The RK5200 pulls air from the bottom of the
rack, across the modules, and then exhausts the heated air through the
upper-rear of the rack. A 1 RU spacer below the rack is required to ensure
adequate airflow.
CERTIFICATIONS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
• S Mark for Argentina
OPTIONAL ACCESSORIES
RK5001B-4U Single-width blank module
RK5200PS Replacement power supply module
*Operating maximum is noninclusive of components within the rack.
†
BTU/H is based on 20% internal inefficiency rating; 80% of power output is consumed by NET5400T1 units.
‡
Use a 1 RU spacer under the rack to ensure adequate airflow.
Pelco, the Pelco logo, Endura, and the Endura logo are registered trademarks of Pelco, Inc.
All product names and services identified throughout this document are trademarks or registered
trademarks of their respective companies. The absence of a trademark or registered trademark
from this document does not constitute a waiver of intellectual property rights.
Product specifications and availability subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
Apac Specbook.book Page 296 Tuesday, November 16, 2010 10:10 AM