Instruction manual

28
Sphere System Instruction Manual
29
GSWWDR30
Wall Dimmer Receiver
As with other Sphere Receivers the
GSWWDR30 can be set to a channel.
It also has up, down and centre
on/off buttons. These only control
the load directly connected to it.
Commands from a Controller will
override settings made with the up
and down buttons.
Operating Scenes
STEP 1
Scene Mode
The rightmost ‘Mode’ switch must be
in the down position (towards ‘SC’).
STEP 2
Choosing the
Scene
Press the button
of the scene you
wish to use.
STEP 3
Changing Scenes
To use different
scenes press other
buttons.
STEP 4
Dimming the
Scene
Use the up and
down buttons to
adjust the overall
brightness of the
active scene.
Note: Holding the up
or down button will
eventually raise or
lower all channels to
maximum or minimum.
To restore the scene
press the relevant
scene button.
STEP 5
Turning off Lights
Press the centre
button.