Instruction manual

30
Sphere System Instruction Manual
31
Setting the Function Switches
for more Rooms
Once the first room has been
installed, up to 7 rooms can be
added to the system using the same
House switch setting. This will also
give the opportunity to control these
rooms using a Master Controller
(please see the Master Controller
section of the instructions). A Master
Controller can be added at any time
and will not need any programming.
House Switches
The house switches on the additional
room Controllers should be set
exactly the same as the ‘Room 1
Controller’.
Room Switches
The room switches on the Controller/s
for rooms 1– 8 should be set as shown
opposite.
All House switches in the appropriate
Controllers must be set exactly the
same.
Mode Settings (Rooms 2– 8)
Master/Slave mode switch set to
Slave mode – towards S.
Set Dimmer/Scene mode switch as
required, see ‘Using Sphere Modes’,
page 24.
The house settings above are shown
as an example only.