Instruction manual

32
Sphere System Instruction Manual
33
Master Controller
A Master Controller will control Scene 1, in up to
8 different rooms.
• In order to be able to use the Master Controller
two or more rooms must have been set up with
the same house code.
• Both Wall and Handheld Controllers can be
used as a Master Controller. It is an additional
Controller to the others in the system.
Master
Controller
can be 5 or
8 channel
wall/remote
controller
STEP 1
Adjust the House
switches so that they
match the House
switches on the
Controller/s within the
rooms to be controlled.
Setting a Master
Controller
STEP 2Adjust the
Adjust the Room
switches on the Master
Controller so they are
all in the down position.
STEP 3
Adjust the Mode
switches so that the
Master/Slave switch
(left function switch)
is set to the up
position (M). The
dimmer/scene switch
(the right function
switch) should also
be set to the up
position (D). Master
Mode is now set,
no programming is
necessary.
Operating a Master
Controller
STEP 4
Press button 1 on the
master controller to
turn on scene 1 in
Room 1, press button 2
to turn on scene 1
in Room 2, etc.
Centre button toggles
scene 1 in all Rooms
on/off.