Instruction manual

14
Sphere System Instruction Manual
15
Visual Represenation of Channels
Installation Information
Install and set-up (see page 20)
one room at a time. All lighting and
other loads to be controlled must
be connected to a Receiver. The
Controller(s) send signals to the
Receiver(s) and these in turn alter the
state of lighting and other devices
attached to them.
There is no limit to the number of
Receivers on each channel, but each
individual Receiver has a maximum
load that should not be exceeded
(see pages 34-35 and the appropriate
Installation and User guide).
The maximum line of sight range is
30 metres. It is always good practice
to mount wall controllers, wherever
possible, such that no Controller is
more than 30 metres from Receivers.
If Sphere is to be installed in more
than one room refer to section ‘Setting
the Function Switches for Different
Rooms’ on pages 30–31 before
starting installation.