Product manual

TAC Xenta 527-NPR, Product Manual 4 Connecting the TAC Xenta 527-NPR to Your Network

Schneider Electric Buildings AB, Mar 2010 19 (42)

04-00053-01-en

4 Connecting the TAC Xenta 527-NPR

to Your Network

The Xenta 527-NPR integrates with your building control system by

communicating across the Ethernet using TCP/IP transport protocols. It

also connects directly to an I/NET controller LAN. This allows the

Xenta 527-NPR to bridge communications between the Ethernet and

the I/NET controller LAN.

The following figure shows an example network configuration.

Note

• Before you connect the Xenta 527-NPR to your network, assign

it an IP address and load its software. Refer to TAC Xenta

500/700/911/913, Product Manual or TCON300, I/NET Seven

Technical Reference Guide the for the necessary instructions.

Fig. 4.1: An example I/NET configuration.

Intranet

Vista Network

Router

Node

I/NET Controller LAN

Node

Install the

Xenta 527-NPR

at the I/NET

controller LAN

location

Xenta

527-NPR

Firewall 2Firewall 1

Internet

DMZ