Datasheet

74 INSTALLATION MATERIAL/THORSMAN/MC1038INT/GB
Type Qty/ Article Pipe Sealing In-situ. dimensions Qty/ Article No.
pack T- thread, range, A mm B mm C mm Pack T-
mm ∅ mm Type TFM
TCG-5.2 20 3270 006 15.2 5–10 33 23 9 50 3272 002
TCG-8.6 3270 055 18.6 5–14 35 29 10 50 3272 051
TCG-20.4 3270 105 20.4 5–14 35 29 10 50 3272 101
TCG-22.5 3270 154 22.5 5–14 35 29 105 50 3272 152
TCG-28.3 3270 204 28.3 9–20 37 35.5 12 25 3272 200
TCG-37 3270 253 37 15–25 46 43 12 25 3272 259
Colour: grey
Tighten the cable gland in the hole.
Metric Thread
1)
Type TFM
TCG-M20 3270 071 – 5–14 35 28.5 10 50 3272 061
TCG-M25 3270 170 – 9–20 51 34.5 12 25 3272 160
1)
Metric armoured conduit thread to DIN 40430.
Cable Glands, TCG (IP 54)
With Strain Relief
Basic Data
Suitable for
Tapped und untapped holes. In un-
tapped holes together with a lock-
nut.
Applications
For sealing cables and providing
strain relief for cables in switches,
apparatuses, machines, etc.
Advantages
• Seals without tightening (S 43,
IP 54) and strain relief without
tools
– very quickley fitted
– easily accessible, even in tight
corners
– he sealing ability does not
deteriorate as a result of strain
relief
• Each size has a very wide seal-
ing range – rational, economic
installation and stocking
Approval
The strain relief unit has been
approved by SEMKO, the Swedish
Electrical Board for Testing and
Approval of Electrical Equipment.
Class of enclosure
IP 54 in accordance with IEC.
Material
Glass-fibre – reinforced polyamide
(PA). For material properties see
the table on page 75.
Accessories
Locknut for untapped holes.
Range
Locknut
To achieve strain relief, tighten the
upper part of the gland.
Puncture the diaphragm with a
pointed screwdriver.
Twist the conductors together.
Insert the cable or pipe.
Technical data
m10870
m10840
m10860
P1054
m10850