Datasheet
UT00298_05-2005_EN 1
Mini-trunking
TMK-T20
Halogen-free PC/ABS
TMK-T20 is a halogen-free mini-trunking for quick and simple con-
cealed installation of cables and wires for signals and power, data,
telecoms and alarms. It is fixed directly to the surface with penetrat-
ing fixings in pre-punched holes. Alternatively it can be secured
with adhesive (only permitted with low-current wiring).
The materials have excellent mechanical properties, including very
high impact resistance. They are highly resistant to UV light and in
a fire they do not give off any hydrogen chloride gases which form
hydrochloric acid on contact with water. These properties make
TMK-T20 exceptionally well suited for hospitals, computing centres,
control rooms, etc.
P4903
Basic data
Benefits
• The base has pre-punched holes at 100 mm
centres for quick fixing with nail plugs TPS
4/5x25, for example.
• Ribbed back surface on the size 20 x 17 mm
– good bonding with adhesive tape (signal
cables only)
• Accessories for TMK-T20: internal and
external corners, an L-piece for 35 mm
bending radius with Ø7 mm cable, and a stop
end.
Material and colour
Trunking and corners of halogen-free PC/ABS
and ABS respectively. White RAL 9010.
Temperature range
PC/ABS: -25 °C to +60 °C.
Delivery lengths
Supplied in 2.5-metre lengths. Can be cut on
site – use shears or Thorsman’s practical tools.
Installation
1. Drill holes in the mounting surface. There are
prepunched holes in the trunking base. Use a
4 mm drill.
2. Fix the trunking. Recommended fixing: nail
plug TPS-4/5x25.
3. Snap on the cover.
Halogen-free