User's Manual

15
7. Ethernet menu
Code Description
(FdrA) M [FDR Action]
FDR service command
Type: Command (read and write)
Possible
values:
• [IDLE] (IdLE): No command.
• [SAVE] (SAUE): Command: save.
• [REST] (rESt): Command: download.
• [DEL] (dEL): Command: delete.
The command remains displayed during the action then reverts to the value [IDLE] (IdLE).
Default value: [IDLE] (IdLE)
(FdrS) M [FDR autosave]
Enable periodic saving of the FDR service
Type: Configuration (read and write)
Possible
values:
• [No] (nO): Automatic saving disabled.
• [Yes] (YES): Automatic saving enabled.
Default value: [No] (nO)
(Fdrt) M [FDR t.autosave]
Interval for periodic saving of the FDR service
Type: Configuration (read and write)
Possible
values:
• [2] (2) to [9999] (9999): 2 min to 9999 min.
Default value: [10] (10)
(FdrE) M [FDR state]
FDR service state
Type: Display (read-only)
Possible
values:
• [IDLE] (IdLE): “Idle”.
• [INIT] (INIt): Initialization.
• [CONF] (CONF): Configuration.
• [RDY] (rdY): Ready.
• [GET] (GEt): Download the current configuration.
• [SET] (SEt): Save the current configuration.
• [APP] (APP): Write the FDR server configuration to the drive.
• [OPE] (OPE): Operational.
• [UCFG] (UCFG): Not configured.
Default value: [IDLE] (IdLE)
(Fdrd) M [FDR Error Code]
FDR service status code
Type: Display (read-only)
Possible
values:
• [0] (0): No communication interruption
• [2] (2): The FDR configuration file is not compatible with the drive type
(example: the drive is not the same rating as that defined in the FDR file).
• [3] (3): Error reading the FDR configuration file on the server.
• [4] (4): Error writing the FDR configuration file to the server.
• [7] (7): Time-out for receipt of the FDR configuration file from the server.
• [9] (9): Duplication of IP address.
• [12] (12): The FDR configuration file is missing.
Default value: [0] (0)