User Manual

10 of 30
5200WHC2 Wiser Home Controller 2 Installation Instructions
© 2013 Schneider Electric. All Rights Reserved.
The following table lists the software programs from Schneider Electric that are applicable
to the Wiser Home Controller 2
Software Product Purpose Rev. Level
Wiser 2 Software Operational software supporting the Wiser
features and user interface.
Installed at the
factory
C-Bus Toolkit Software Configures the C-Bus network and creates
project files that are used by PICED.
Latest (see Note)
Zoolkit Software Locates components on the ZigBee network
and creates a file that is used by PICED.
Latest
PICED Software Configures the Wiser Graphical User
Interface (GUI) and creates the project files
that are transferred to the Wiser 2 unit.
Latest
1. When you download the software from the Internet,
you have several options. It is recommended that you
‘Save” the zipped file to your hard drive.
2. IMPORTANT! Make a backup copy of any current
Toolkit project files and PICED project files before you
open the setup program.
3. Shut down any running sessions of Toolkit or PICED
before opening the setup program. You might have to
shut down antivirus software on your PC. If you do not
have permission to add or remove programs log in as
a user with adminstrative privileges.
4. In your file manager, select the zipped file and open
it. Then select and open the setup.exe file. The
Setup Wizard appears in a dialog box. Select Next to
continue.
5. On the Licence Agreement page, click the ‘I accept
the agreement’ radio button and then click Next.
6. Follow the prompts that allow you to decide on file
locations. You can usually accept the defaults. It is
best to perform a ‘full installation’ to make sure that
you have the latest drivers and components.
7. Be sure to access the HELP files, sample projects
and tutorials in the software programs as you use
them.