User Manual

15 of 30© 2013 Schneider Electric. All Rights Reserved.
5200WHC2 Wiser Home Controller 2 Installation Instructions
PICED Software Recommendations
Be sure to follow the programming steps given earlier to map your existing network.
During the PICED programming session, the following actions are recommended:
Action or Topic Recommendations
Select or De-select C-Bus If you are not using C-Bus devices, de-select C-Bus.
PICED will use a placeholder project file. In the future,
you can add a C-Bus project.
If you are using C-Bus, select the option. You can use an
existing project file created by C-Bus Toolkit software.
Wiser Home Controller 2 Create a project specifically for the Wiser Home
Controller (Wiser 2). PICED needs to know that the
device you are programming is a Wiser Home Controller.
Some sites may have touchscreens that use PICED
projects.
Dynamic IP Address Use dynamic IP address assignment, whenever possible.
The software configuration tools developed for use with
the Wiser 2 search for the Wiser unit use DHCP (Dynamic
Host Control Protocol). This dynamic method of assigning
the IP address for the Wiser unit is recommended.
Later, you can assign the Wiser 2 a static IP address if
needed.
PICED Help files Use PICED Help! The help system is provided to answer
your questions about selection options and concepts that
you might not be familiar with. If you have a problem or
question, access Help before calling technical support.
Factory Settings Select each tab in the Wiser options. Use the factory
settings when possible. Be sure to enable the ZigBee
option if you want to add the project to the Wiser.
User Profiles Create user profiles that allow access to functions
needed by the end user. Limit those functions that can
cause system malfunctions. Use security features if the
Wiser 2 might be accessed by unauthorised persons.
Transfer files to the Wiser 2 Save your work in PICED before beginning the transfer
job. Make sure the Wiser 2 is not busy when you do
the transfer. For example, make sure that the Wiser 2
has completely finished a firmware download (can take
several minutes) or file management task.