User Manual

5 of 30© 2013 Schneider Electric. All Rights Reserved.
5200WHC2 Wiser Home Controller 2 Installation Instructions
Figure Ref. Component Description
1
Wiser Home Controller 2 (Wiser 2)
2
AC/DC power supply
3
C-Bus connector and cover
4
Ethernet patch cable
Battery (not shown), accessible from the door on the bottom of the unit (see the
safety Warning on Page 3).
Product Features
The Wiser Home Controller 2 (Wiser 2) includes firmware and documentation. The most
recent versions of the configuration software packages are downloaded from the Internet.
Product Number Description
5200WHC2 Wiser Home Controller 2, interface unit for local and remote monitoring
and control of electrical devices. Includes controller, power supply,
battery, C-Bus connector plug and a network patch cord.
The figure below shows the packaged components.
Clipsal by Schneider Electric software products. In order to program the Wiser 2,
you MUST have the latest versions of C-Bus Toolkit and PICED software from Schneider
Electric. C-Bus Toolkit contains the C-Gate Utility and the Control System IP Utility. Install
Toolkit to ensure that you have all required software available on the PC. PICED sets up
the Wiser Home Controller environment to provide a Graphical User Interface (GUI) that
monitors and controls devices in a home or commercial site.