User Manual

6 of 30
5200WHC2 Wiser Home Controller 2 Installation Instructions
© 2013 Schneider Electric. All Rights Reserved.
The Wiser 2 is configured by the installer using software tools. There are no controls or
switches that require user attention. With the exception of the Power LED, the front panel
LED indicators can be turned off by the installer, if desired.
The system connections are made at the back panel of the Wiser 2. Your installation might
not use all of the available ports. The figure below shows the location of the indicators and
ports on the Wiser 2.
Front Panel
Back Panel
1
2
3
4
5
6
7
8
9
10
11
13
Door open
12
C-Bus MRA
Figure Ref. Connector or Indicator
1
AC/DC power supply connector
2
Ethernet LAN RJ socket connector (also supports 802.af POE)
3, 5, 12
USB connectors
4
HDMI connector
6
C-Bus connector
7
C-Bus network activity indicator LED
8
MRA activity indicator LED
9
Power indicator LED
10
ZigBee network activity LED
11
Wireless LAN activity LED
--
ZigBee UZI port (under top cover)