User Manual

7 of 30© 2013 Schneider Electric. All Rights Reserved.
5200WHC2 Wiser Home Controller 2 Installation Instructions
Top Cover Removal and USB port for an Optional ZigBee Adapter
To remove the top cover, (1) press the release tabs on the rear panel and then (2) lift the
cover. The USB Zigbee Interface (UZI) is and optional feature. Refer to the instructions
included with the UZI.
UZI port (USB)
1. Press tabs
from below
2. Lift top cover
Battery Location
The battery is located on the underside of the Wiser 2. The battery is installed prior to
shipping and should last for several years before requiring replacement (refer to the safety
Warning on page 3).
Battery compartment cover
Top
Bottom