Technical Data Bulletin

19-112
© 2019 Schneider Electric
All Rights Reserved
30 mm Enclosures
9001KY/SKY Control Stations
schneider-electric.us
Class 9001 / Refer to Catalog 9001CT1104
9001KY and 9001SKY Control Stations
Table 19.344: Empty Enclosures (for Customer Assembly) [1]
UL Types 1, 3 and 13/
NEMA 1, 3, and 13
UL Types 1, 3, 4 and 13/
NEMA 1, 3, 4 and 13
UL Types 1, 3, 4, 4X and 13/
NEMA 1, 3, 4, 4X and 13
No of Holes
Sheet Steel Die Cast Zinc
Stainless Steel (304) Polymeric (Plastic)
Type Type Type Type
1 KYAF1 KY1 KYSS1 SKY1
2 KYAF2
KY2 [2]
KYSS2 SKY2
3 KYAF3
KY3 [2]
KYSS3 SKY3
4 KYAF4
KY4 [2]
KYSS4 SKY4
6 KYAF6 KY6 KYSS6 SKY6
NOTE: See Assembled Control Stations , page 19-113
KYG1Y
(mushroom head not included)
Table 19.345: Guarded Enclosures
UL Types 1, 3, 4 and 13/
NEMA 1, 3, 4 and 13
No of Holes
Die Cast Zinc
Cover Color Box Color
Type
1
Gray Gray KYG1 [3]
1 Yellow
Gray KYG1Y [3]
NOTE: See Assembled Control Stations , page 19-113
K26
Table 19.346: Stainless Steel (302) NEMA 1 Flush Plates [4]
No of Holes
Description Type
1
1 Hole flush plate, cover screws, insulating liners
K25
2
2 Hole flush plate, cover screws, insulating liners
K26
3
3 Hole flush plate, cover screws, insulating liners
K27
4
4 Hole flush plate, cover screws, insulating liners
K28
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[1] When ordering, add prefix 9001 to the catalog number.
[2] Only KN200 series legend plates will fit upright on these enclosures with their long axis vertical.
[3] Includes 1” NPT threaded conduit opening.
[4] To be used with a standard 2 x 3 in. general purpose switch box. A 2.5 in. deep switch box should be used if two Type KA contact blocks are mounted side by side. If two Type KA contact
blocks are mounted in tandem, a 3.5 in. deep box should be used.