Installation manual

Safety
152936 vii
This manual is for use by qualified personnel only.
General Safety Precautions
1. When installing the Xantrex GT250 E use only components recommended or
sold by the manufacturer. Doing otherwise may result in a risk of fire, electric
shock, injury to persons, and will void the warranty.
2. Do not attempt to operate the Xantrex GT250 E if it has been dropped, or
received more than cosmetic damage during transport or shipping. If the
Xantrex GT250 E is damaged, or suspected to be damaged, see the
Warranty for this unit in the Xantrex GT250 E Operation and Maintenance
Manual.
3. To reduce the risk of electrical shock, lock-out and tag the Xantrex GT250 E
before attempting any maintenance, service, or cleaning.
Personal Safety
Follow these instructions to ensure your safety while working with the Xantrex
GT250 E.
Qualified Personnel
Only qualified personnel should perform the transportation, installation and initial
operation and maintenance of the Xantrex GT250 E (IEC 364 or CENELEC
HD 384 or DIN VDE 0100 and IEC 664 or DIN VDE 0110). Follow all national
accident prevention regulations.
Qualified personnel, within the meaning of these basic safety regulations, will be
people who are familiar with the installation, assembly, start-up and operation of
the Xantrex GT250 E and have the appropriate qualifications with respect to their
functions.
Safety Equipment
Authorized service personnel must be equipped with standard safety equipment
including the following:
• Safety glasses
• Ear protection
• Steel-toed safety boots
• Safety hard hats
• Padlocks and tags
• Appropriate meter to verify that the circuits are de-energized
(1000 Vac and DC rated, minimum)
Check local safety regulations for other requirements.